Good spec Kouki 180sx

[marksull]

Just gauging interest on this. Wont be able to get prices and full parts list and proper add until Friday at the earliest.
(ad copied from for sale ad)

took the car out of storage 3 weeks ago to get back on the road for summer but turns out the head is cracked and I cant afford to fix it. Car was perfect I had thought when I parked it up in December. Had just been mapped on low boost at 300hp and 301 ft/lb torque at wheels. (higher boost not mapped as head had just been done) high 300's should be reachable when mapped again. mapping is paid for already in WCP.

If you want something put your name on part in comments. Genuine guideline prices appreciated!

Some spec I can think of:
1997 Kouki 180sx

Exterior:

Kouki front bumper provisionally sold

kouki front splitter €100

Kouki spoiler crazy drift

Kouki rear lights provisionally sold

Aftermarket side skirts (unknown from japan) one cracked clean. €60

Aftermarket rear bumper (unknown from japan) €120

Dmax carbon vented bonnet €500

lazy eye front light kit €50

Front steel arches have slight roll/flare mint condition. €150

Wheels:

SSR Vienna Kreis
18x10 +23 rears
18x9 +23 fronts
225/40/18's all round. fronts 90% rears brand new
All centre caps included €1200

Front and rear spacers. (think 25mm ultralite spacer, need to confirm) ?? offers

Interior:

Bride fixed back drivers seat with rail. boslter has tear but stitched €300

Origional Kouki passenger seat €70

Origional Kouki rear seats with boot carpet €60

Rear half cage unknown brand (painted purple) provisionally sold

Big Dildo gear knob purple €20

Sparco suede steering wheel (painted purple) ??offers

Sparco snap off boss (purple) €50

Bride door cards €60

Bride gearstick gaitor €20

Brand new Greddy profec boost controller (new model) ???

Sony headunit with remote control €60

Origional 180sx carpets writing faded provisionally sold

Rear cusco strut brace €80

Running gear:

Engine:
Low mileage SR20det blacktop non VVT neefd to check problem when out

Nistune ECU €250

Gearbox
Exedy three puk clutch (heavy, relatively new) Derry

Turbo:

HKS 2540 (just installed with 0 shaft play) €600

Tomei elbow €60

4 branch stainless steel exhaust manifold painted white and fully heat wrapped €100

will do deal on all 3 turbo mani and elbow

Full stainless steel exhaust from elbow all the way to back box €150


Z32 AFM with plug to HKS mushroom filter €170

550cc injectors (either sard or nismo, cant remember which ones I used) €250

Greddy large intercooler with pipes crazy drift

Thick aluminium rad €100

Walbro fuel pump €60


Cusco 2 way diff €350

Front strut brace provisionally sold



Suspension:

Brand new, less than 500km fully adjustable HSD coilovers €600

A lot of parts already spoken for so if people are happy with prices pm or viber me and ill stick your name on them depending on who had held them first. parts will be sold on first come first served basis if held parts are not being taken.

PM or text/call 0857518743. mobile will not work at home but if you have viber you can text me on that
Alternatively email marksull88@gmail.com

Some pics:

[IMG][/IMG]

[IMG][/IMG]

Attachment 4822Attachment 4823
[IMG][/IMG]

[joey]

Would ya have these bits?
2 rear safety belts and buckles for the floor.must be working 100% and no wear as need them for Nct
2 sunvisors and clips
2 rear speaker covers.
Kick panel that covers ecu on passengers side.

[michealkirwan]

will that half cage fit a s14?

[LennyS13]

Interested in rear kouki lights and few other bits texted you there

[marksull]

not sure. can anyone confirm? doubt it??

[marksull]

Would ya have these bits?
2 rear safety belts and buckles for the floor.must be working 100% and no wear as need them for Nct
2 sunvisors and clips
2 rear speaker covers.
Kick panel that covers ecu on passengers side.

ill check tomorrow for ya

[marksull]

Interested in rear kouki lights and few other bits texted you there

cant get phone coverage here. pm or viber bud

[crazy drift]

Text you no viber there m8 cheers

[Stevo]

PM me a price complete if you want it gone in one piece

[danny86]

Interested in nistune, 2540,manifold,braided lines, z32, 550's.
Pm me prices
Cheers