My big spec SR32. Lots of quality parts.

[driftescort]

Breaking my huge spec SR32.

No dibs, full payment in either cash or through paypal (with you paying the fees) will hold parts.

Parts are located in Cork, Ireland but I am happy to organise delivery of any parts to anywhere in the world at buyer’s cost but please appreciate that this will take time so you may have a little wait. I will be as quick as I possibly can be though. ALL PARTS ARE SENT AT BUYERS RISK. We all know how couriers can be so if you want items posted to you it will be at your own risk, I will always do a very good job of packaging parts however.

I could possibly do a fair deal on people buying multiple parts. For example if someone fancies building another SR32 I could sell the complete set-up to make their job very quick, tidy and easy. But again you will have to be quick as I don’t expect this stuff to hang around for long.

I have listed parts as I remember them but I am sure I will come across more which I will add as I do so please continue to check back.

I will get pictures up of individual parts as they come off but for now you can check out the car’s for sale thread for some pics:

http://www.driftworks.com/forum/drif...rice-drop.html

Straightcam SR20DET, recently compression tested with 150PSI across all cylinders. Very healthy engine that has never caused me any issues. Fitted with:
Tomei Rocker Stoppers,
Nismo Thermostat,
Genuine Nissan Water Pump,
Bentcam oil Pick-up pipe,
Grade 8 iridium plugs just fitted.
Comes with all Alternator, inlet manifold and all sensors still attached
SOLD


Genuine Greddy TD06 20G set-up. Complete with:
Turbo,
Genuine Greddy ‘Mid-mount’ manifold. Very rare manifold that gives that distinctive ‘crackle’ sound that is sought after by those who know. Manifold has been welded but is not leaking.
Trust 4 bolt external wastegate with screamer pipe.
Oil feed and drain,
3 inch custom made S/S downpipe with S/S flexi welded in as well as two lambda bosses. Downpipe is V-Band onto the turbo. This was made to suit my SR32 but I think it should suit most R/S Chassis but I cannot confirm. I had it made to suit a very low car so it runs REALLY close to the floor of my R32.
SOLD

740cc Nismo Injectors. Direct fit and plug-in for SR20.
SOLD

Nistune ECU, to suit early straightcam SR20. locked by mapper but I have the access code.
SOLD

Engine and gearbox looms made by Norfy to suit a straightcam SR20 in a R32. FANTASTICALLY well made, I literally plugged them in, the engine started and I have never had any issues.
SOLD

Nismo engine mounts
SOLD

Z32 Afm with plug. In good working order.
SOLD

Apexi air filter to suit Z32 AFM. In good condition.
€70



Koyo Alloy rad to suit SR20
SOLD

RB Viscous Fan, good upgrade for SR.
€50

GKTech fan, brand new never used
SOLD

Generic oil catch can with vent to atmosphere.
€30

Exedy lighteweight Flywheel
SOLD

SR20 Gearbox, in good working order. Has GKtech brass shifter bush fitted and GKTech uprated shifter springs.
SOLD

Tein SuperDrift Coilovers. Now discontinued and an AMAZING coilover in my opinion. Custom specced by me with 9KG front springs and 7KG rear. In perfect working order with no leaks, bangs or rattles and no seized parts. These coilovers were approximately €1500 new.
€600





R32 Propshaft in good condition.
SOLD

S14/R33 Front Lower arms lengthened 20mm, plated for strength and notched to offer maximum lock. Fitted recently with DW Poly Bushes and new balljoints.
SOLD

180SX Rack in good working order.
€70

SR20 Engine crossmember modified to move rack forward to eliminate over centre. Done in an EXTREMLY clean manner. You would not even know it has been modified.
SOLD

R32 Life modified front hubs for more lock, quicker steering and reduced bumpsteer.
SOLD

R32 front brake set-up. Complete with Callipers, discs, and pads.
€200





Rear Skyline brake set-up. Complete with twin pot callipers, discs, pads, internal drum handbrake set-up and R32/S13 handbrake cables.
€350



DW braided brake lines. Front and rear
SOLD

DW adjustable rear toe arms. Will suit all Non-Hicas R/S Chassis Cars.
€80

R33 GTST halfshafts.
€50 each

S14 rear subframe with solid, lifter bushes fitted so it can be fitted to S13/R32/A31. Also has solid diff bushes fitted.
€150



S14/S15/R33/R34 rear lower arms fitted with DW polybushes.
€100






Rear Geomaster hubs. Type 2 to take drum handbrake set-up.
SOLD

BN Sports 4 Piece kit. In good condition. Rear bumper needs paint but you will probably be painting it the colour of your car anyway.
SOLD

Genuine D-Max D1 Spec front vented wings. Have a little bit of broken fiberglass in a couple of places but can easily be repaired.
SOLD

MORE PARTS IN POST BELOW

[thehatchet]

Send on your number I'll take the Rear Geomaster hubs. Type 2 to take drum handbrake set-up.
€300

[driftescort]

Custom made Drag spoiler, made out of stainless steel with adjustable supports. Bootlid has had custom brackets made up for the supports.
€250 for just the spoiler
€350 for spoiler mounted on R32 2 door bootlid







EXTREMLY rare (I think) Veilside mirrors. I have never seen another pair anywhere. In very good condition. Fit perfectly.
€200







Pair of N1 style ‘Brick’ headlights with brackets to take GTR grill. In very good condition.
SOLD

Cusco bolt-in through dash cage. This has been modified to include bolt-in double door bars (that allow you to keep the door cards) and a bolt-in rear diagonal. The cage is fully bolt-in so can easily be swapped from shell to shell. Passed Prodrift scrutiny. Could include cut dash for extra.
€600











Doorbars, could do with a quick lick of paint again:




Sparco Pro2000 KEVLAR fixed back bucket seats. These were came out of a Group N rally car and where crazy money new, something like 1k+ each. They are extremely light. Some wear in a couple of spots but in good condition generally. Extremely light.
€500 for the pair

Genuine Nismo gearknob.
€30



6 point harness with 3 inch straps and aircraft style buckle.
€60



GTR Fuel pump.
€120

Custom made single box 3 inch exhaust system from downpipe back. Worked very well on my car even though it was very low.
€100

Kaaz 2 way diff in 4.08 Non ABS casing with 5 bolt output shafts fitted. Diff has been rebuilt and locks up hard.
€500



4.3 Welded diff in non-ABS casing with 5 bolt output shafts fitted.
€350

DW Poly gearbox mount.
€60

20mm driveshaft spacers with bolts and nuts. For 5 bolt shafts
€60



DW braided clutch line.
SOLD

Tein front tension rod. Bush has been cut to offset the rods inwards to give more room for lock.
€50





Tein track rods and ends. Rods are virtually brand new.
€80

Non-offset rack spacers
€50

Pair of 5 stud rear hubs, in good working order.
SOLD

Rear adjustable traction arms. Outside bracket has been cut down to prevent it from rubbing the CV boot on squat.
€50





DW Adjustable Toe rods, in good working order. No play.
€80



HKS Kansai rear strut brace.
€120





Generic front strut brace.
€70



HKB boss bought new from DW to suit HCR32.
SOLD

MORE PARTS IN POST BELOW

[nikkisixx69]

Water temp gauge? Oil temp guage? Talk to me

[Stevo]

€150 delivered for wings?

[driftescort]

Side mount seat rail for Passenger side.
€120

Passenger side


Exeedy Stage 2 paddle clutch kit.
SOLD

Classic flat type Nardi 360mm. some slight wear but good overall. Snap-off boss NOT included.
€120





1993 HCR32 2 door shell. Very clean shell. No rust. Less than 100k KMs on the shell. Will come with all glass, doors, boot, rear lights and D-max overfenders fitted. Rear arches have been tubbed very well and very high so the car can sit LOW. Will also include all interior looms etc. Everything has been removed from the shell in such a way that it would be very easy to put back together, no cutting stuff out with an angle grinder! The shell is Irish registered and I have the logbook (saving €1700 on VRT!). Does not come with any of the front end panels/lights, mirrors or roof/boot spoiler. If I get full asking price I will also leave the thatcham CAT1 alarm with immobiliser and remote central locking in it. This cost me over €400 to have fitted.
€1500



JUST LOOK AT ALL THE COOL STICKERS IT COMES WITH TOO!

[whiskeyjack88]

Pm sent

[derek89]

Price on dmax bonnet and spoiler?

[driftescort]

I am holding onto the bonnet for the moment and I want to see how the spoiler comes off first.

[Stevo]

No Sorry. €150 plus is fair enough I think. I am sure they will end up making money for you anyway

Lol How bad is the damage billy?