Follow Us On Follow us on Facebook
Register
Page 1 of 2 12 LastLast
Results 1 to 10 of 33

Hybrid View

  1. #1
    di Member
    Status
    Offline
    User ID
    5034
    Join Date
    May 2013
    Location
    Limerick
    Posts
    151

    Default

    Looks very well lad fair play


  2. #2
    di Member
    Status
    Offline
    User ID
    3697
    Join Date
    Feb 2012
    Posts
    179

    Default

    @japscrap - a year and a half Dave ya bollox!!
    @pole drift - I was going to do it and i regret not doing it now! It will be fine though, wont stop it slidin!

    Cheers for the comments lads, fitted the Defi's at the weekend, they are a serious job! Started at tryin to find the problem with the clocks not working this evening. Hope to have it sorted by tomorrow.


  3. #3
    di Member
    Status
    Offline
    User ID
    3697
    Join Date
    Feb 2012
    Posts
    179

    Default

    Update time!!
    Well lads, since i last updated this i have a fair bit of work done to the car. Got the NCT on her which was a huge thing for me!

    Got the test back in July so was delighted with the length of the test i got! no worries until Sept 2015!!
    So after i tested it i taxed it and just got used to driving it and enjoying it! since then iv being collecting bits and bobs for it!

    project MU rear pads

    Driftworks Braided brake lines

    HKB steering Wheel Boss

    GReddy Water T-Piece and a Greddy oil sandwich plate.

    Another Confetti to match my drivers one


  4. #4
    di Member
    Status
    Offline
    User ID
    3697
    Join Date
    Feb 2012
    Posts
    179

    Default

    So as ye can see i already fitted some of the bits, hadnt really time to get at it properly as we were absolutely up the walls busy with work all summer. Then i went on hols and came back and started doin a few bits to it.


    Fitted my braided lines front and back

    Fitted the Pads


    I also bought GK Tech handbrake extenders, you can see the difference in the length of the standard to the modified ones. I havent used the car with these fitted as i have to bleed the brakes and i have the gearbox out and im fitting my Nismo lightweight flywheel and im fitting a new gearbox as mine was grinding into second. (pics tomorrow)


  5. #5
    di Member
    Status
    Offline
    User ID
    3697
    Join Date
    Feb 2012
    Posts
    179

    Default

    Here's a few random snaps of the car!

    This was snapped at the Airside meet in dublin at the end of last month. Thats one of the lads 1JZ PS13 beside it

    Gettin petrol on the way home.

    So thats it for now. Gonna roll the arches durin the week and lower it more. Il get more pics when shes off the lift!
    All comments welcome! Cheers


  6. #6
    di Member
    Status
    Offline
    User ID
    4067
    Join Date
    Jun 2012
    Posts
    450

    Default

    Ahh boy ray !! Looking tidy ..!! Where did ya get greedy t-piece out a ??


  7. #7
    di Member jdmjimmy's Avatar
    Status
    Offline
    User ID
    324
    Join Date
    Aug 2009
    Posts
    3,322

    Default

    Looks a good tidy car nice to see build updates


  8. #8
    di Member
    Status
    Offline
    User ID
    3697
    Join Date
    Feb 2012
    Posts
    179

    Default

    Ha ha cheers Mick!! get ur finger out u!! ah from japland!!
    Cheers Jimmy!


  9. #9
    di Member conor's Avatar
    Status
    Offline
    User ID
    644
    Join Date
    Nov 2009
    Location
    Castlebar co.Mayo
    Posts
    725

    Default



    all the lifestylers together in one photo !!! :P


  10. #10
    di Member
    Status
    Offline
    User ID
    3697
    Join Date
    Feb 2012
    Posts
    179

    Default

    Well lads, haven't updated this in a good while, haven't really done a lot to it of late but have been gathering bits and pieces here and there!
    So after having standard power since iv started driving the car i'm pretty fed up with it! (ya can never have enough power)
    Bought a HKS-GTRS turbo with braided lines and a tomei elbow, 555cc Nismo injectors and just bought a Z32 and hard pipe off stevo on here. Will be buying a new boost controller from japan in the new year and getting it mapped after that on a Nistune all going to plan!
    Ever since i bought the car there has been wiring issues! I changed all the looms in the car and it sorted 99% of them but my clocks dont work and i have a toggle switch working my drivers side window to get it through the test. It keeps blowing drivers side window switches for some odd reason! Gonna get one of the lads to have a look at it to see if he can get them working over the xmas. The water pump went there 3 weeks ago so ordered a new one from FRsport along with ngk iridium plugs and turbo locking tabs! I have the bumper off as the bottom right side of it is all smashed and wanna get that fixed for when i put it back on the road! Thats it for now! will add some pics of the turbo etc when i start fitting them!


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •