Low entry Jack's

[daz12]

Anybody on here able to recommend where to pick up a good quality low entry Jack? Getting sick of the whole using blocks of wood and a normal jack!! In Cork preferrably, unless someone knows a crowd that delivers them!

[JP89]

Try Barrys Motorsport, or Jebb Tools

[WANGAN-JZX]

Tfortools in armagh are doing free next day delivery with there low profile jacks on sale at £105 for the 2.5T Sealey 2500LE or £179 for the 2.75ton Sealey 2750LE.

http://www.tfortools.co/index.php/

Take paypal too, I just ordered the 2750LE model. There is a crowd in Dublin doing 1.5ton low profile jacks for 130euro from acrostools. Another crowd in cork doing SIP 2.5ton jacks for 180euro. See the links below.

http://www.donedeal.co.uk/tools-for-...00-ton/5300969

http://www.donedeal.co.uk/tools-for-...g-jack/3759563

[Damien]

I bought a sealey one from toolstop in the uk a few weeks back.
Just make sure they have enough clearance. Some measure a low point, then start to slope back up straight away, while others stay low for the length of the jacking arm, and give plenty of clearance.

[DaveO59]

Tfortools in armagh are doing free next day delivery with there low profile jacks on sale at £105 for the 2.5T Sealey 2500LE or £179 for the 2.75ton Sealey 2750LE.

http://www.tfortools.co/index.php/

Ya I bought a Sealey RJAS2500 off their ebay store, it was E160 including shipping - http://www.ebay.co.uk/itm/Sealey-RJA...item3f23c82c52

I think it's a deadly job, it'll get in anywhere and is light enough to slide around the place without hanging out of it. If I had a choice I'd buy the same again no question

[Smokey Bear]

Only thing about some of the cheaper jacks is they take a lot of effort to pump or a lot of pumps. It's a serious pain in the hole.

[James Doyle]

Only thing about some of the cheaper jacks is they take a lot of effort to pump or a lot of pumps. It's a serious pain in the hole.

could not agree more and usually they give in after 2 years or so your best bet is too buy a bluepoint one out of a snap on van you can either get steel or alloy think I paid about 220 for mine which is the steel one but you will have it for life