ps13 silvia k rebuild

[murray sr22]

hi not many would have seen this car as i havent got the chance to drive it as the engine has blown on me twice and rebuilds arnt cheap so at them moment it is sitting in my shed with no engine. the engine is up in drd motorsport getting rebuild ive gone for a blacktop sr20 but im making it a sr22. ive been gathering bit for this since the engine went 2years ago.

it started out as a standardish silvia with coilovers 16s advans and few other bits and alot of people would no it as i bought it of elite autos and it was sitting in there field for about 2 years before i bought it??

anyways after the first engine went i decided i would change it a good bit as never rely like the standard look of them so i started to sand down the body and painted it in subaru raven black met. also fitted a new origin stremline kit along with a new set of rota grid drifts 8.5 in front and 10s in the back.

spec is as it stands now
exterior
origin kit
rota grids
projector headlights
amber corner lights
silvia grill
roof spoiler (not fitted)
carbon wrapped door pillars

interior
gtr r32 seats (mint)
deep dish steering wheel
hydro (not fitted)
blitz boost gauge
heads up display
cunt of a dvd screen in the dash

running gear
apex preformance sr22 stroker kit
nismo bearings
oem oil pump
oem n1 big ends
full oem gasket set
oem water pump
oem oil spray bars
oem oil pick up
apex adjustable cam pulleys
apex baffled sump
bottom end fully balanced
BC 272 cams
BC valve springs
BC titantium retainers
driftworks rocker arm stoppers
sard 740cc injectors
greddy inlet plenum
sard fuel pressure reg
drilled and grooved disk all round
project mu pads all round
nismo 2 way diff fully rebuilt
solid subframe bushes
exedy paddle clutch
uprated flywheel
rb25 box with conversion plate
short shifter
custom prop
alluminium rad
autobann 88 front mount
hks 2835 top mount turbo kit
tial external wastegate
screamer pipe
custom elbow and downpipe (to be made when engine fitted)
decat
mocol 15 row oil cooler and relocation kit with thermostat
theres probly loads left out as its all up in drd getting built will update spec and pics off all the bits when i get up again?

plans are to get it are to get it running mapped and ran in on dyno and dynod to see what break and torque it makes

buy full japspeed arm kit to make it handle better and set up by wkd

get it through a test

paint and seam seal fully underneath ( half done already)

paint and seam seal boot floor

paint and seam weld engine bay ( going gold met)

fully compund and buff the full car as its gone dusty and faded from sitting up

make all new stainless frount mount pipes

make new air intake

get new gauges for inside (probly defi hopefully)

tidy up interior as was bit rough from lying up (flocked dash and door cards)

get boot plastics as it came with none


any way this is how the car looks now in the shed

[murray sr22]

http://s1143.beta.photobucket.com/us...ia002.jpg.html

http://s1143.beta.photobucket.com/us...57266550562898

http://s1143.beta.photobucket.com/us...57266550562898


this is how it looks in the shed now

[johnnysil80]

pics not workin?

[murray sr22]

this was it finished 2 years ago

http://s1143.beta.photobucket.com/us...68951814006018


http://s1143.beta.photobucket.com/us...68951814006018

http://s1143.beta.photobucket.com/us...68951814006018

http://s1143.beta.photobucket.com/us...68951814006018


this is what it was like when i got the car from elite

http://s1143.beta.photobucket.com/us...95976630119688

[rps13Carlow]

Really clean machine, some finish on the body

[seanyboy s14]

That was a fine looking machine .don't see to many ps13's anymore would love one myself

[derek89]

Jesus man that will have some spec on it wen finished....is it staying a road car?

[pole drift]

Copy the IMG code dude

[seanie R.33]

Thats a lovely ps some spec,needs some nice dish tho!

[subzero]

jesus it turned out well fair play !!