Follow Us On Follow us on Facebook
Register
Results 1 to 10 of 16

Hybrid View

  1. #1
    di Member
    Status
    Offline
    User ID
    386
    Join Date
    Aug 2009
    Location
    Cork
    Posts
    1,003

    Default

    Quote Originally Posted by Quealy View Post
    Hope they don't go too mad with the roll cage rules, says main hoop needs to be 45x2.5, id say more than half the cars in Ireland have the full cage made of 43mil OD pipe cus its all that's available in local hardwares.
    Get some 44.6mm stuff and a good coat of primer and paint and it'll be mint

    Front legs that bend around the dash (dash dodgers) are not permitted.
    Looks like there's going to be more drama if dash-dodgers are permitted again?

    All main hoops regardless of material should be constructed from 45x2.5mm or 50x2mm tube minimum.A-pillar bars, door bars, rear stay bars and all additional diagonal and brace bars must be constructed of 38x2.5mm or 42x2mm.
    I'm guessing it should have "at least" for the measurements of the main hoop and all other bar sizes?



    Nice to see the rules out reasonably early anyway


  2. #2
    di Member
    Status
    Offline
    User ID
    2320
    Join Date
    Jan 2011
    Posts
    121

    Default

    Quote Originally Posted by DaveM-sport View Post



    I'm guessing it should have "at least" for the measurements of the main hoop and all other bar sizes?



    Nice to see the rules out reasonably early anyway

    Using tube that exceeds minimum specs is not a problem.

    "Drifting is easier than it looks"

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •