, the rocker cover was getting a bit grubby so decided to re-spray it....
This is it off, as you can see its seen better days!!!
Next i got the grinder out and took off the nissan bit and other bit of writing, smoothed it all down, gave it a good clean and sanding to smooth it all out ready for paint
so next up was 3-4 coats of high temperature primer, and then a few coats of blue
i masked it all up then , and covered the bigger bits with newspaper
next sprayed these areas with white paint and then removed all the masking tape/paper and gave it 3 caots of petrol & oil resistant lacquer
And the un fitted finished rocker cover...
and fitted
![]()













Reply With Quote


















































