My sierra drift car

[sideways_madness]

A pic from yesterday at north west fest thanks to Adam

[sideways_madness]

pics on jon44
http://www.jon44w.com/site3/viewthread.php?tid=2512#

[Wally620]

Was in the green 14a it's a pity Eglinton is such a trek for us. Should get one organised in fermanagh/Tyrone area

[sideways_madness]

Was in the green 14a it's a pity Eglinton is such a trek for us. Should get one organised in fermanagh/Tyrone area

Aye, should have left her laying up there for this weekend lol

[sideways_madness]

Little update,

After last few outings I've been struggling with the handling of the car so made a start on sorting it out, first of all the anti roll bar had been cut into with the wheels about 10-12mm on each side, this explained the sparks lol,

So decided to remove the anti roll bar and. Build a whole custom front suspension. So I made a set of adjustable front TCA's and adjustable compression struts/tie rods, and made a start on making a set of eccentric top mounts. I have a full set of springs ordered 450lbs rears and 600lbs fronts so they should stiffen her up a good bit

Pics of how it is at the min, still few bits to finish off but it's getting there and lock is good now
So need to get all cleaned down and painted or zinc coated

[sideways_madness]

Got my new springs, these should fairly stiffen her up now. also got sone longer wheel studs.


Working on my eccentric top mounts. Just tapping the holes to bolt them on


And all built up

[sideways_madness]

Starting to run out of time to have her ready for mondello at the weekend, but its really good motivation

[franmk]

thats tidy work on the bottom arms.

[sideways_madness]

thats tidy work on the bottom arms.

cheers,
was plenty of head scratching done but getting there should have them fully finished this evening.

[haydomiata]

Wer did u get the bearing for the lower arms? Seems like a good job fair play