200sx s13 parts forsale

[fitzer]

X2 rear subframes....45e each
X2 front subframes...20e each
X2 steering colums...55e each
X1 power steering rack..110e
set of half shafts 6 bolt output
drive shaft with middle bearing piece...70e
welded diff good condition ratio 3:9 ....80e
standard front and rear shocks...50e for them
MPH clocks...70e
sparco sprint 5 black seat...60e
rb25det spec 2 head with cams,rocker cover, valves nd all..120e
rb25det standard exhaust mani..30e
rb25det standard inlet mani with standard injectors, injector wiring, throttle body...90e
rb25det spec 2 block with pistons crankshaft oil pump everythin really only piston 1 is melted but the cylinder isnt acc bad and it needs a set of big end bearings...90e
rb25 power steering pump...55e
4 stud hubs front and back with calipers disks nd all...70e for all 4
bonnet graffited over a bit red in color...40e
X4 doors. 1 set in blue and one set in red. both sets include doorcards windows all electrics etc. 80e a set (slight bit of rust under where the mirror goes on 1 door in the red set).
X2 sets of rear lights with middle section sayin 200sx clean enough(one centre section has a piece of plastic broke off) 60e a set
front pop up lights...50e a set
X2 master cylinders..70e each
rear bootlid no rust painted purple with a rattle can and the window was all graffiti'd over 50e.
CA18DET engine loom..30e
dash spray painted purple(looks class)..25e
skid wheels with tires....
lots of interior parts.....
loads more parts there pm me and i might have it.
also pm me if ye want a pic of sumthin.................make us an offer on what ever ye want need it all gone