79 635csi for competition drifting?

[IsPKup]

Anyone know if my stripped csi was rebuild for drifting using fibreglass panels and d 3.5 high compression engine with dogleg box would it be any good.She has an lsd (which would be shmmed) and possible turbo upgrades.I was just told my e30 pickup can't be used in competition.

[aka pete]

Why not.. strip it and skid it.. 286bhp plenty if u make it light enuf, if u need more powers supercharge it but it'll be sumthin different and dogleg is the danglies, why'd they not catch on on???

[IsPKup]

was tinkin the same even the boot lid musta bin made of 1.5mm steel.Since I removed wings,bumpers,etc I can nearly lift the shell with interior still in it so I reckon if I make moulds for doors,wings and lid a bonnet for fibreglass panels she'd get below a tonne.The front and rear subframes are heavy tho.300+nm torque though.Think my e30 pickup may have to be abandoned or put on the road.

[Lucius]

Less than tonne?
It's going to be very hard to achieve.

[IsPKup]

Under a ton A bit optimistic is it?I suppose that engine is over weight for 200bhp as well.

[DaveM-sport]

220bhp... And that only tells half the story, those yokes have enough Torque to pull a house down


It's difficult to even get an E30 completion car under a tonne. I was able to lift the front or back of my lightened 320 rolling shell with wheels, coilovers, steering rack, anti-roll-bars and everything fitted with just the interior, windows, engine, box and diff removed no problem but once the cage is finished, a diff, a heavy S54 and all the other bits to complete it it'll be quite abit heavier again.


Suppose if the pickup definitely isn't allowed compete, you could use the E24 and see how it goes. If it works, think about the lightweight panels and improving it then.

I can't see why a pickup isn't allowed though when convertibles are allowed and if you want to use modifying the chassis between the suspension mounts as a reason, are they going to stop Darren's AE86 from competing too as its pretty much just the bare door pillars and a tiny bit of the original floor that's left?