Project 328i - a lot to learn

[sideways-theonlyway]

Nice build man ! Good to see use getting stuck in !

Ya dont need buckets of money to have fun drifting. Grass roots drifting FTW .

As for the hydro , would ya not make your own ?

Get down to the scrappy and get a mater cyclinder and a small bottle for the brake fluid .

Or ya can buy a master cyclinder for a hydro out of most rally spares shop . Their about 40-50e .

Weld up a wee box to bolt your master cyclinder to and a bit of threaded bar for a handle .

Aye pull out the abs fuse out too .

Edit. Mod`d the knuckles for extra lock on mine not too long ago well worth doing !

Cut out 25mm off the knuckles and welded them on again , where the track rod end goes into the struts .

And for extra camber cut the wishbones and welded a 35mm piece into it .

cheers man, yeah must do that to the knuckles when I'm fitting the coilovers. The old stick welder will be out

[Mac_C]

cheers man, yeah must do that to the knuckles when I'm fitting the coilovers. The old stick welder will be out

The very yock i used meself