my SR RX7 for breaking

[ken red 180]

http://s1120.photobucket.com/albums/...=driftyrex.jpg
if there is enough interest i will break it as tough times are killing me to do this
anyway heres wat i have


SR 20 engine black top just serviced new plugs oils liquids filter……………700e...SOLD
550 yellow injectors and fuel rail ……………………………….....................200e...SOLD
T2871R garrett tubby good for 400 bhp ………………………………..........500e....SOLD
Z32 air flow metre and harness ……………………………….........................100e...S OLD
4 OMIRI gauges and pod and senders oil temp not working …………………200e... SOLD
ORC twin plate clutch and light flywheel.250e...SORRY LADS this price was a mistake should of be 350e... SOLD
RB 25 gearbox with modified stick for SR …………and plate…………………….......350e... SOLD
bran new SPARCO GO PRO SEAT only sat in a hand full of times…250e...SOLD
Red wide bucket seat and floor mount really tidy seat very comfy ……………100e...SOLD
BGW 1750mm wide 2ft high ……………………………….............................250e...SO LD
HYDRO E brake with girling .7 cylinder and drift works lines ………………200e...SOLD
FLOOR mount pedal box with bottles and cylinders + lines banjo bolts ect ect 425E...SOLD
CHIPPED ECU to run 400 bhp tubby 550 injectors Z32 ect ect ………………150e...SOLD

18 inch chrome WORK EMOTIONS 18x9.5 et +12...235 40”all 90% maxis tires 1000e
bran new alloy rad ………………………………...................................... ......150e
CUSTOM intercooler from RX to SR conversion and stainless pipes ……….200e
CARBON bonnet for RX7 FD ………………………………............................150e
Wielded diff for RX7 ………………………………...................................... ....100e
RX7 clocks ………………………………...................................... ...................50e
RX7 cat perfect condition ………………………………................................. ..50e
RX7 stainless exhaust with back box ect ect ……………………………….......100e
RX7 complete braided break lines front to back ……………………………….200e
Complete registerd RX7 shell fabricated for SR conversion new fire wall ect ect …1500e
YELLOW stuff pads for RX7 FD bran new only used one day …………………40e
12 skid rims for drifting all 17 x7.5 17x8 17x9 most have tires on em …………400e
Few other bits and pieces just can”t think at the min....starter altenator loads of other bits and pieces
PRICED TO SELL no time wasters or dreamers
ADDED BITS
TRS 6 point harness ....50e
GTR fuel pump ...........70e
AUTOBAN back box and rear section of exhaust 70e for 180sx

[smack]

hi, whats ur best price on the fd carbon bonnet, z32 afm with plug and yellowstuff fd pads? also what condition is the carbon bonnet in and would you courier the stuff or is it collection only? also would you have an fd standard front lip? you can pm best price if you like. cheers

[bruno s14]

Il take box if it's mint?? Pm me your num dude

[gary d]

Pm'd ya there

[aka pete]

Is this car finished??
How much for the whole thing?

[ian g sr20]

Condition of turbo?. Pics of seat and skid rims plz

[jap scrap]

What size is the exhaust housing on the turbo is it .64 or .86

[thehatchet]

ill take the Z32 air flow metre and harness if you break it

[ken red 180]

box sold + conv plate sold
injecters + afm sold
tubby sold .64 housing have a bran new .86 housing there for that tubby never used it came on it but i never used it i perfer no lag wat so ever tubby was cutting in at 1800rpm with my set up
carbon bonnet has a slight repair on the front lip slightly bigger than golf ball size
don"t have splitter
yes the car is finished everything done except cage and seem wield....
it will be next week before i break the car so if there is any change in parts not selling i"ll post ya back straight away.......

[s13/180sx]

condition of orc clutch? any pics, much left on it?