Follow Us On Follow us on Facebook
Register
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 39
  1. #1
    Senior Member
    Status
    Offline
    User ID
    935
    Join Date
    Feb 2010
    Posts
    248

    Question sr20det not reving out and dying out ???

    hi

    I have major problem with engine that i can not get my head around it. its a s13 sr20det 93 black top drift car. spec on car is standard ecu, injectors and airflow. boosting at .9 ~~ .car has walbro pump, fuel reg, intercooler,s15 turbo proper one straight throw exaust .
    whats happing is
    start car, starts perfect,ticks over 100% no noise no rattles or bangs.
    car will take rev to about 5000rpm then die out. then start perfect again try to rev higher than 5 same thing happens again.
    this is what i have done to try to fix the problem

    swapped ecu+
    coil packs+
    airflow.
    fresh fuel
    new fuel filtr
    new plugs
    tested fuel prussure
    changed injectors
    checked turbo piping
    knock sensor

    all parts i have taken from my sileighty that i know are working
    im thinking that could it be actuator not opening (yet to change) and check cat.

    has anyone had this problem or any suggestions what it could be.
    very greatfull for any help.
    thanks
    niall


  2. #2
    di Member
    Status
    Offline
    User ID
    130
    Join Date
    May 2009
    Posts
    712
    Blog Entries
    1

    Default

    great first post!!!!


  3. #3
    Senior Member
    Status
    Offline
    User ID
    47
    Join Date
    May 2009
    Posts
    9,385

    Default

    Quote Originally Posted by mark View Post
    great first post!!!!
    As above!! you using a z32 afm and bigger injectors on a standard ecu


  4. #4
    di Member bart's Avatar
    Status
    Offline
    User ID
    38
    Join Date
    May 2009
    Location
    laois
    Posts
    5,381

    Default

    Quote Originally Posted by Stevo View Post
    As above!! you using a z32 afm and bigger injectors on a standard ecu
    no he says standard ted...


  5. #5
    Senior Member
    Status
    Offline
    User ID
    47
    Join Date
    May 2009
    Posts
    9,385

    Default

    Quote Originally Posted by bart View Post
    no he says standard ted...
    so it does wooooops!


  6. #6
    Senior Member
    Status
    Offline
    User ID
    935
    Join Date
    Feb 2010
    Posts
    248

    Default

    lads i said standard ecu, standard airflow meter (not z32).and standard injectors

    ?????


  7. #7
    di Member bart's Avatar
    Status
    Offline
    User ID
    38
    Join Date
    May 2009
    Location
    laois
    Posts
    5,381

    Default

    Quote Originally Posted by nicko View Post
    lads i said standard ecu, standard airflow meter (not z32).and standard injectors

    ?????
    yes so we see.. and said
    and keep an attitude like that and you wont get any help


  8. #8
    Senior Member
    Status
    Offline
    User ID
    935
    Join Date
    Feb 2010
    Posts
    248

    Default sorry lad

    only seen comment afterwards! so any ideas.


  9. #9
    di Member bart's Avatar
    Status
    Offline
    User ID
    38
    Join Date
    May 2009
    Location
    laois
    Posts
    5,381

    Default

    when you say that it revs to 5000
    does it mean that you've boot to floor and just wont go by 5000??
    its it banging and spluttering when it reaches 5000 or just dies down???


  10. #10
    Senior Member
    Status
    Offline
    User ID
    935
    Join Date
    Feb 2010
    Posts
    248

    Default thats right

    yes when car is ticking then go to rev it it will rev to 5000rpm with no problems than after that it wont go any further makes kindoff noise like back fire then dies out completely. normally it would hit limiter. o and exhaust isnt leaking or anything.


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •