Follow Us On Follow us on Facebook
Register
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35
  1. #11
    di Member
    Status
    Offline
    User ID
    253
    Join Date
    Jul 2009
    Location
    Cork
    Posts
    1,138

    Default

    Good excuse to upgrade to a exedy paddle clutch.
    Got 1 off Mike barry earlier this year + it's a good clutch to take abuse.

    You'll see a big difference with the alloy rad, great upgrade for a rb.

    I've a mint set of used ebc yellow stuff rear pads for a 32 if you're interested.


  2. #12
    Moonlight Kids™ dil's Avatar
    Status
    Offline
    User ID
    1267
    Join Date
    May 2010
    Location
    Kerry
    Posts
    1,424

    Default

    Quote Originally Posted by Cooldrft View Post
    Good excuse to upgrade to a exedy paddle clutch.
    Got 1 off Mike barry earlier this year + it's a good clutch to take abuse.

    You'll see a big difference with the alloy rad, great upgrade for a rb.

    I've a mint set of used ebc yellow stuff rear pads for a 32 if you're interested.
    thanks man il see how it locks up once I have the hydro fitted, may take em off you.

    I installed the water temp gauge after the rad so I don't know what the difference was but with just a spin around town it was reading around 70 degrees, sound normal for an rb??


  3. #13
    di Member
    Status
    Offline
    User ID
    253
    Join Date
    Jul 2009
    Location
    Cork
    Posts
    1,138

    Default

    Think 72deg is the normal, I've a nismo stat in mine + it's 65deg durning normal driving.
    Where you'll really notice the difference is on the track ,the bigger rad keeps the temp down alot better.
    Just make sure you bleed all the air out of it.
    Presume you got a uprated rad cap "1.3" with the rad.


  4. #14
    Moonlight Kids™ dil's Avatar
    Status
    Offline
    User ID
    1267
    Join Date
    May 2010
    Location
    Kerry
    Posts
    1,424

    Default

    Bit of an update.

    Gaskets are done.

    New exedy stage 3 clutch has been fitted.

    Fitted a 2way diff yesterday thanks to dermot ha!

    Dermots 32 a bit bare



    Mine



    a pretty sight haha



    and the swap!





    I also got these camber arms off grange which are going in this week.




    Have some problem with which I think may be the flywheel so thats also getting sorted this week and hopefully will be sorted for driftfest!!


  5. #15
    Moonlight Kids™ dil's Avatar
    Status
    Offline
    User ID
    1267
    Join Date
    May 2010
    Location
    Kerry
    Posts
    1,424

    Default

    Update time!!

    Camber arms are in.

    Exedy lightened flywheel has been fitted.

    Just fitted adjustable toe arms today and what a job they made!

    Fixed my handbrake problem which was plaguing me at diftfest last month.

    Harness is fitted.

    Stripped the rear interior.

    Noticed there was a hole in my exhaust so took it off to have a look and it had split just behind the muffler box so cut that out and replaced it with a straight pipe so its now straight pipe from the turbo back.

    While the work was being done on the exhaust I decided to put shotgun tail pipes on too!

    Since the rear camber arms were fitted I am running 0 degrees camber so the wheels poke out a nice bit more so had to raise it up, Going to get the arches flared next week and slam it again!

    Oh and got a few stickers for it haha!

    Next on my list is a set of tires for the front as I was sick of all the understeer I had at driftfest.

    I also got a second hand oil cooler and filter re-locator which I haven't fitted yet, not sure if I will either, what are peoples thoughts on using a second hand oil cooler?? saw a thread where someone said its fine once its flushed with petrol but I'm unsure!!

    Will get pics up soon!


  6. #16
    di Member seanie R.33's Avatar
    Status
    Offline
    User ID
    668
    Join Date
    Nov 2009
    Posts
    1,694

    Default

    U been busy,love to see the flared arches,keep the updates commin ur doin a nice job!


  7. #17
    di Member
    Status
    Offline
    User ID
    253
    Join Date
    Jul 2009
    Location
    Cork
    Posts
    1,138

    Default

    You should run between -0.5 to -1.0deg on the rear wheels.

    Dont see any thing wrong with running a second hand oil cooler if it's flushed out properly.


  8. #18
    Moonlight Kids™ dil's Avatar
    Status
    Offline
    User ID
    1267
    Join Date
    May 2010
    Location
    Kerry
    Posts
    1,424

    Default

    Quote Originally Posted by seanie R.33 View Post
    U been busy,love to see the flared arches,keep the updates commin ur doin a nice job!
    Thanks man, haven't been driving it much on the road lately so allows me to spend more money on it!

    Quote Originally Posted by Cooldrft View Post
    You should run between -0.5 to -1.0deg on the rear wheels.

    Dont see any thing wrong with running a second hand oil cooler if it's flushed out properly.
    Ya i must put a bit of negative on the rear.

    I heard people on about a possibility of filings being in the core so was a bit worried about fitting a second hand one


  9. #19
    di Member
    Status
    Offline
    User ID
    1791
    Join Date
    Sep 2010
    Location
    kerry
    Posts
    837

    Default

    pay day for me is coming around again off you .haha....going to look savage when shes flared and droped again....looks funny driving around with its arse in the air at the min .whos flaring the archs??


  10. #20
    Moonlight Kids™ dil's Avatar
    Status
    Offline
    User ID
    1267
    Join Date
    May 2010
    Location
    Kerry
    Posts
    1,424

    Default

    Quote Originally Posted by dermot-r32 View Post
    pay day for me is coming around again off you .haha....going to look savage when shes flared and droped again....looks funny driving around with its arse in the air at the min .whos flaring the archs??
    ha ha stop it looks shit up in the air, need to get it sitting right again!

    Dunno who to do it, maybe same as yours?! only I want way more flare than he gave you!


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •