Follow Us On Follow us on Facebook
Register
Results 1 to 6 of 6

Hybrid View

  1. #1
    di Member
    Status
    Offline
    User ID
    194
    Join Date
    Jun 2009
    Location
    Galway
    Posts
    470

    Exclamation Yashio Factory Gauge Help...?

    This Yashio Factory Water Temp Gauge was in the 180sx when i bought it.......it wasnt connected when i got the car, so i fitted it today and it lights up but nothing changes, and when i press any of the buttons nothing happens....!!

    I think these only work with a standard ecu and its a standard ecu thats fitted.

    Any ideas what it could be??

    Maybe its a fault code??

    Here is what appears on the screen....




    thanks guys!!


  2. #2
    di Member k1984w's Avatar
    Status
    Offline
    User ID
    318
    Join Date
    Jul 2009
    Posts
    1,178
    Blog Entries
    1

    Default

    what ecu are you using pfc? they plug into the consult port as far as i no but you should be able to hard wire it into the pfc just get a pinout for your ecu

    few pinouts here might help
    http://www.240sxforums.com/forums/sr...u-pinouts.html

    Create your own banner at mybannermaker.com!

  3. #3
    Senior Member subzero's Avatar
    Status
    Offline
    User ID
    183
    Join Date
    Jun 2009
    Location
    Muunchster
    Posts
    1,358

    Default

    seen this before on some forum ... sometimes it displays any current ecu fault codes instead of temp ... looks like thats whats happening to yours .

    edit : what car have you it in ??

    lad here says it worked in his s14 but not his ps ....

    http://www.driftworks.com/forum/tech...emp-gauge.html

    Last edited by subzero; 10-07-11 at 10:55.

  4. #4
    di Member
    Status
    Offline
    User ID
    194
    Join Date
    Jun 2009
    Location
    Galway
    Posts
    470

    Default

    its in a 97 180sx sr20det blacktop.

    it has a standard ecu.

    So does anyone know what this fault code is??


    It wasnt fitted when i got the car......maybe its not the right one.


    thanks


  5. #5
    Senior Member subzero's Avatar
    Status
    Offline
    User ID
    183
    Join Date
    Jun 2009
    Location
    Muunchster
    Posts
    1,358

    Default

    Quote Originally Posted by BoyRacer_X View Post
    its in a 97 180sx sr20det blacktop.

    it has a standard ecu.

    So does anyone know what this fault code is??


    It wasnt fitted when i got the car......maybe its not the right one.


    thanks
    if you know some1 with an s14/s15 try plug it into there consults and see does it give the same error.


  6. #6
    di Member k1984w's Avatar
    Status
    Offline
    User ID
    318
    Join Date
    Jul 2009
    Posts
    1,178
    Blog Entries
    1

    Default

    FAULT CODES
    11 Crank Angle Sensor/Camshaft Position Sensor.
    12 Air Flow Meter/Mass Air Flow Sensor.
    13 Engine Coolant Temperature Sensor.
    14 Vehicle Speed Sensor.
    21 Ignition Signal.
    22 Fuel Pump.
    23 Idle Switch.
    24 Throttle Valve Switch.
    25 Idle Speed Control Valve.
    28 Cooling Fan Circuit.
    31 ECM.
    32 EGR Function.
    33 Heated Oxygen Sensor.
    34 Knock Sensor.
    35 Exhaust Gas Temperature Sensor.
    36 EGR Control-Back Pressure Transducer.
    37 Knock Sensor.
    38 Right hand bank Closed Loop (B2).
    41 Intake Air Temperature Sensor.
    42 Fuel Temperature Sensor.
    43 Throttle Position Sensor.
    45 Injector Leak.
    47 Crankshaft Position Sensor.
    51 Injector Circuit.
    53 Oxygen Sensor.
    54 A/T Control.
    55 No Malfunction.
    63 No. 6 Cylinder Misfire.
    64 No. 5 Cylinder Misfire.
    65 No. 4 Cylinder Misfire.
    66 No. 3 Cylinder Misfire.
    67 No. 2 Cylinder Misfire.
    68 No. 1 Cylinder Misfire.
    71 Random Misfire.
    72 TWC Function right hand bank.
    73 TWC Function right hand bank.
    76 Fuel Injection System Function right hand bank.
    77 Rear Heated Oxygen Sensor Circuit.
    82 Crankshaft Position Sensor.
    84 A/T Diagnosis Communication Line.
    85 VTC Solenoid Valve Circuit.
    86 Fuel Injection System Function right hand bank.
    87 Canister Control Solenoid Valve Circuit.
    91 Front Heated Oxygen Sensor Heater Circuit right hand bank.
    94 TCC Solenoid Valve.
    95 Crankshaft Position Sensor.
    98 Engine Coolant Temperature Sensor.
    101 Front Heated Oxygen Sensor Heater Circuit right hand bank.
    103 Park/Neutral Position Switch Circuit.
    105 EGR and EGR Canister Control Solenoid Valve Circuit.
    108 Canister Purge Control Valve Circuit.

    Create your own banner at mybannermaker.com!

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •