1jz problem help

[Dunnedriftin]

Tapity noise sounds like the hydraulic buckets

Is the wiring loom 100% the same? no same/wrong connecter in the wrong place? sounds like the Idle air control valve or the likes...

[babyeater690]

Tapity noise sounds like the hydraulic buckets

Is the wiring loom 100% the same? no same/wrong connecter in the wrong place? sounds like the Idle air control valve or the likes...

what do i do with the hydrolic buckets is it serious problem or is it just noise that when i give it a run it might go or change them

im nearly sure the loom is the same i swaped back to the orignal ecu last night and it didn go away.
this just came out of nowhere one day it was fine then the next the lights came up and engine spluttered i also swaped over the fuel control thing under the pass window it done nothin.
any help would be great as i dont fancy runnin it and the egine to go pop i dont really have the cash for a rebuild of two 1jz's at the mo

[slammedmind]

Dave heres the link to the fault code procedure, you have to download the manual and its in the last few pages. This is where i would start.

Hydraulic buckets wont bring on battery lights, handbrake lights etc. They are mechanical and nothing to do with the electrical system......

[babyeater690]

i now the engine is a small bit tapity just wondering will giving it a good run reduce it or am i better off changing the buckets now if i can
and what link lad

[babyeater690]

anyone any ideas for the lights no faults seem to be showing up