R32 running problems

[Cooldrft]

Seems to happen at steady speeds mainly 80 - 100 kph nd 3,000 rpm

the plugs seral number is Q20R-U11

I think the plugs are not suitable for 0.9bar boost.
I'd recommend changing the plugs to NGK Iridium - BKR7EIX

[jonny1505]

Them plugs where in it before hand and it still did it , i just changed them to see if it would help , i dont know whats happening , i went up to punchestown nd it did it loads of times really annoying

Where can i get a secondhand afm in ireland ? and could i get there number

[Cooldrft]

Them plugs where in it before hand and it still did it , i just changed them to see if it would help , i dont know whats happening , i went up to punchestown nd it did it loads of times really annoying

Where can i get a secondhand afm in ireland ? and could i get there number

Well I'd still recommend BKR7EIX plugs ,might not solve the problem but at least they're the right plugs.

There's several r32's being scrapped on donedeal.

[robbie@tdp.ie]

If it's at part throttle cursing it's probally the O2 sensor. Try disconnecting it.

Robbie

[jonny1505]

If it's at part throttle cursing it's probally the O2 sensor. Try disconnecting it.

Robbie

will do

[glenntec]

id try what robbies sayn first, knows his stuff.
wouldnt go buyin an afm yet, just try borrow one of someone to see if it the source of the prob
will ony take 10 mins to find out.
only thing simular that happened to one of mine was cruising she wouldnt go past 6k, then 5
then 4 then 3k got her to a mates house and she wouldnt start.
went through all the usual shite, plugs, pump,afm,packs etc etc.
turned out to be the cam gear sensor bearing had collapsed!
hope ya get back goin again soon

[jonny1505]

i unplugged the 02 sensor nd now it wont rev over 2,500 rpm

[B&G Extreme Drifting]

what colour coilpacks are in them standard ?

black man as standard

[jonny1505]

there yellow ones in this

[robbie@tdp.ie]

i unplugged the 02 sensor nd now it wont rev over 2,500 rpm

Something wrong there it should run fine without the O2 sensor.

Best thing is to get a some one with consult sw to plug in and check the sensors.

Robbie