fitting hydro ?

[rowaner2002]

Hi looking for info on fitting hydro (if its correct)
ive comp brake hydro and .625 also have driftworks lines
heres what i would like to know, is hole at back of .625 cylinder goin to rear brakes and other to master cylinder ?
also ive got it fitted like this at the moment and its all tight just the rear hose is leaking at the fitting on the .625 its as if the adapter for the hose is to short and not sealing up against the lip inside the .625

any ideas?


heres pic

[ian g sr20]

if i remember it correctley the rear hole is the 1 you feed front the master cylinder and the front 1 goes back to the brakes.

[mickel]

Hi looking for info on fitting hydro (if its correct)
ive comp brake hydro and .625 also have driftworks lines
heres what i would like to know, is hole at back of .625 cylinder goin to rear brakes and other to master cylinder ?
also ive got it fitted like this at the moment and its all tight just the rear hose is leaking at the fitting on the .625 its as if the adapter for the hose is to short and not sealing up against the lip inside the .625

any ideas?


heres pic

the rear hole is the feed to the cylinder

front one goes to rear brakes

[B&G Extreme Drifting]

Hi looking for info on fitting hydro (if its correct)
ive comp brake hydro and .625 also have driftworks lines
heres what i would like to know, is hole at back of .625 cylinder goin to rear brakes and other to master cylinder ?
also ive got it fitted like this at the moment and its all tight just the rear hose is leaking at the fitting on the .625 its as if the adapter for the hose is to short and not sealing up against the lip inside the .625

any ideas?


heres pic

well man jus after getting this kit also, yea bang on the left1 goes to reservoir and right to brakes the oppisite of what you'd expect it to be..basically the shorter out of the 2 lines goes to reservoir!! as for your leak maybe uv ur male & females the wrong way around. have a look inside the fittings & you'l get ur head around it

[rowaner2002]

well man jus after getting this kit also, yea bang on the left1 goes to reservoir and right to brakes the oppisite of what you'd expect it to be..basically the shorter out of the 2 lines goes to reservoir!! as for your leak maybe uv ur male & females the wrong way around. have a look inside the fittings & you'l get ur head around it

Grand now i get the picture i went from a diagram found on net which was wrong now... ill do it this way so, as for the leak looked at the rest and there all correct just seems to be too short cause goes right up to the cylinder and gets tight and still leaks , as if its not sealing the inside,...


Cheers all for replys aswell

[B&G Extreme Drifting]

Grand now i get the picture i went from a diagram found on net which was wrong now... ill do it this way so, as for the leak looked at the rest and there all correct just seems to be too short cause goes right up to the cylinder and gets tight and still leaks , as if its not sealing the inside,...


Cheers all for replys aswell

Not at all, glad to help in any way poss. Where is it leaking lad the handbrake or reservoir?? I still hav'nt fired up the car and bled the system coz im doin other bits to. hope dont have same probs cheers and thanks in advance

[gem-s13]

Grand now i get the picture i went from a diagram found on net which was wrong now... ill do it this way so, as for the leak looked at the rest and there all correct just seems to be too short cause goes right up to the cylinder and gets tight and still leaks , as if its not sealing the inside,...


Cheers all for replys aswell

on most handbrake cylinders the nipple for sealing is way to far down in the hole best thing to do is get a copper washer and have it seal against the top of the cylinder,

[rowaner2002]

Not at all, glad to help in any way poss. Where is it leaking lad the handbrake or reservoir?? I still hav'nt fired up the car and bled the system coz im doin other bits to. hope dont have same probs cheers and thanks in advance

grand it was leaking at the rear hole in reservoir sorted it there other day tho got reservoir hole redone not as deep so it would lock all way up on the inside

on most handbrake cylinders the nipple for sealing is way to far down in the hole best thing to do is get a copper washer and have it seal against the top of the cylinder,

grand gem thanks for that only noticed your reply there got it fixed the other day cheers anyways