Ali-d1936's S15 Spec-R

**ali-d1936** · 25-10-12, 22:20

Originally Posted by grange

looking for bn stuff if you can send me his email that would be sweet

Sure thing lad ill send it on now bumper took alot of tidying up but im a fussy fucker.

other news front lips arrived today accompanied by a hefty VAT bill (Customs W@**ers)

so split the fronts painted them up just finished putting them together giving the silicone 24hours to cure so will have all tyres fitted saturday and have the wheels fitted and arches sorted Sunday

... everything going to plan that is

**ali-d1936** · 26-10-12, 17:04

Not related to this but got my new wheels today

took a few snaps

now have 3" 3.5" 4" and 5.5" lips muhaha

tyres getting fitted tomorrow after the silicone fully cures, then all fitted and set up monday

**dil** · 26-10-12, 17:09

class!

**Darenm** · 26-10-12, 17:14

Awesome dude vailside wheels are so cool

**ali-d1936** · 27-10-12, 17:31

Cheers Lads

got tyres sorted today after a bit of a muck up, decided to crack on and stick them on,

235/40/18 on 10.5
225/40/18 on 10,

now waiting on my vented front wings from epracing when they are in, but until then the rolled front wings shall do,

need to lower the rear and take out a bit of camber but couldnt be arsed today.

and im still fairly confident ill be getting rear overfenders too. :/

also is ti normal for a lil air to be leaking out between the tyre and lip? i was told they usually do that for a few hours till they settle in.

he didnt use any bead sealer so will i have to let the air out of the tyres and put some bead sealer on and pump them up again?

**180sx drifter** · 27-10-12, 17:38

the rear arches look awesome rolled

**nikkisixx69** · 27-10-12, 17:41

i honestly wouldnt bother with wings or overfenders cos it looks awesome like that. to make the front fit all ya gotta do is put in the camber to the max, and i tiny bit at the back and your fitment will be perfect

in my eyes the car is perfect like that!!!

**paddyb01** · 27-10-12, 18:06

Originally Posted by nikkisixx69

i honestly wouldnt bother with wings or overfenders cos it looks awesome like that. to make the front fit all ya gotta do is put in the camber to the max, and i tiny bit at the back and your fitment will be perfect

in my eyes the car is perfect like that!!!

Agreed leave the body alone

**ali-d1936** · 27-10-12, 18:08

Originally Posted by 180sx drifter

the rear arches look awesome rolled

ah they came out alright, would need the filler treatment to look there best but im delighted how much of a pull i got on them

screwed up the passanger side front kicking myself now but its getting replaced so dont really mind.

Originally Posted by nikkisixx69

i honestly wouldnt bother with wings or overfenders cos it looks awesome like that. to make the front fit all ya gotta do is put in the camber to the max, and i tiny bit at the back and your fitment will be perfect

in my eyes the car is perfect like that!!!

camber is to the max, the topmounts are at there limits, i could get camber bolts but its about 10mm to the shock anyway, plus its going to require alot of work, where the loom comes out the wing the grommet is in the way along with the bonnet latch cable, so ill be pulling the wing off tomorrow and cutting up to lift them up as far out of harms way then bash out to make some room for full lock with compressed suspension,

Originally Posted by paddyb01

Agreed leave the body alone

il defiantly be getting front wings for comfort ill have a think about the rears.

i think these ones will look nice flow well with original lines and all that jazz.

**paddyb01** · 27-10-12, 18:19

Yeah can run the loom thu the engine bay with out cutting any wire i did it to my one was handy or move the fuse box inside the car took me awhile to move it but was deffo worth it

Thread: Ali-d1936's S15 Spec-R

Thread Tools

Search Thread

Display

Posting Permissions