Will this work??

[colm]

s13 handbrake cables should do the job, they worked on mine anyways.

[GERRYSX]

s13 handbrake cables should do the job, they worked on mine anyways.

where they r32 brakes lad?

[R32slider]

You will deff need the R32 cables lad, personal experance talkin,
the r32 set up is far better IMO than a hydro, once ya keep on eye on the shoes it will never ever let ya down unlike some of the hydros that iv seen,

[GERRYSX]

You will deff need the R32 cables lad, personal experance talkin,
the r32 set up is far better IMO than a hydro, once ya keep on eye on the shoes it will never ever let ya down unlike some of the hydros that iv seen,

thanks lad, must try n locate a set of em, are they hard to fit?

[R32slider]

not too hard, couple of hours, your best way i think is to strip all off the skyline, brakes, backin plate, every thing and transfer them onto your car, the skyline set up has the hicas balljoint attached where yours is just a hole for an ajustment arm to bolt on, pure f*ck of a job to get the balljoint out even tried gas, use the r32 callipers cause yours wont fit on over the bigger disks, you'll have no trouble runnin the skyline cables cause all the bolt holes line up sound, trust me its the best move you will ever make,

[GERRYSX]

not too hard, couple of hours, your best way i think is to strip all off the skyline, brakes, backin plate, every thing and transfer them onto your car, the skyline set up has the hicas balljoint attached where yours is just a hole for an ajuctment arm to bolt on, pure f*ck of a job to get the balljoint out even tried gas, use the r32 callipers cause yours wont fit on over the bigger disks, you'll have no trouble runnin the skyline cables cause all the bolt holes line up sound, trust me its the best move you will ever make,

Cant wate to get them on now, theres hicas in the 180 will it bolt onto that?, ill be transferring hubs,disks,calipers, are brake lines simalar??

[R32slider]

ahh your laughin so dude, only about 5 bolts to open and bobs your uncle fannys your ant, simples, once you have the flexy bit of hose comin out of the 32 caliper then your set, just the cables to hook up and adjust, job done,

[GERRYSX]

ahh your laughin so dude, only about 5 bolts to open and bobs your uncle fannys your ant, simples, once you have the flexy bit of hose comin out of the 32 caliper then your set, just the cables to hook up and adjust, job done,

thats the job lad, are front hubs handy to fit too??

[R32slider]

much the same dude, r32 and s13 are the same chassie so everything bolts straight on, just be carefull because with the 4pods up front ya might have trouble with some wheel fits, we did anyway, best of luck with it

[colm]

where they r32 brakes lad?

sorry man i misread your post. i thought you said r33's. looks like yer sorted now anyways