here are some pic's of the car and what kind of state its in now and what iv done to the engine so far .

here is the car when i got it first.




then i started to take her apart and take the engine out.


and takeing out the engine.








then me and a friend started takeing the engine apart




the head and pistons off.


and when we took the oil pump off we found out that the guy who had the car before us had tryed to weld the end of the cover were it had broken off back on and then put gasket over it .


the block



then the turbo witch was f**ked.had loads of play in it

the crank after we got it ploished.

then we got the head surfaced and the vavles ground in .




just starting to put the head backtogether.


and the block is being surfaced and the slevees honed as we speak.

these are some gaskets ,bearings and head bolts to be put in .



there is alot more to do. im geting a hole new oil pump for it a s15 turbo and intercooler and im going to leave it at that for the moment when i have it done and might go bigger later on . obesely the list of stuff for the car go's on .2way,coilovers,rollcage bucket seats.hydro handbreak steering wheel and gages but im aiming to get the engine done first before i go at any of the that.