my 200sx rebuild

**Kevin'c** · 14-02-11, 18:51

here are some pic's of the car and what kind of state its in now and what iv done to the engine so far .

here is the car when i got it first.

then i started to take her apart and take the engine out.

and takeing out the engine.

then me and a friend started takeing the engine apart

the head and pistons off.

and when we took the oil pump off we found out that the guy who had the car before us had tryed to weld the end of the cover were it had broken off back on and then put gasket over it .

the block

then the turbo witch was f**ked.had loads of play in it

the crank after we got it ploished.

then we got the head surfaced and the vavles ground in .

just starting to put the head backtogether.

and the block is being surfaced and the slevees honed as we speak.

these are some gaskets ,bearings and head bolts to be put in .

there is alot more to do. im geting a hole new oil pump for it a s15 turbo and intercooler and im going to leave it at that for the moment when i have it done and might go bigger later on . obesely the list of stuff for the car go's on .2way,coilovers,rollcage bucket seats.hydro handbreak steering wheel and gages but im aiming to get the engine done first before i go at any of the that.

**Aidan Hogan** · 14-02-11, 18:58

Nice build so far anyway lad

JustJap will be able to help you out bigtime with parts

**Kevin'c** · 14-02-11, 19:17

Originally Posted by Aidan Hogan

Nice build so far anyway lad

JustJap will be able to help you out bigtime with parts

yea mabe but alot of there stuf is a bit pricey.

**babyeater690** · 14-02-11, 19:20

nice work lad wanna do mine

for frrrrrrrrrreeeeeeeeeeeeeeeeeeeeeeeeee

**Kevin'c** · 14-02-11, 19:21

Originally Posted by babyeater690

nice work lad wanna do mine

for frrrrrrrrrreeeeeeeeeeeeeeeeeeeeeeeeee

aw yea nobother!!!!!!!!!!!

**docco86** · 14-02-11, 19:37

nice work man..

**Micko** · 14-02-11, 19:38

Nice job lad! what turbo set up you going for?

**pole drift** · 14-02-11, 19:41

Fair play lad, nice to see your doin it right and rebuilding the engine.

**Stevo** · 14-02-11, 19:37

Originally Posted by Kevin'c

yea mabe but alot of there stuf is a bit pricey.

If you think justjap are pricey your in for a nice surprise when you buy elsewhere

Good job on the diy

**Kevin'c** · 14-02-11, 19:39

Originally Posted by Stevo

If you think justjap are pricey your in for a nice surprise when you buy elsewhere

Good job on the diy

oh yea i no some place's are crazy money justjap are good to be fair.

Thread: my 200sx rebuild

Thread Tools

Search Thread

Display

Hybrid View

my 200sx rebuild

just jap

Posting Permissions