fitting hydro

[babyeater690]

rite lads gona fit the hydro in the soarer the weekend gona get the lines made up dose anyone have pics or vids of this been done like how the y piece ant the back is done and do you take it from the master cylinder to the hydro and then to the rear or just tap of thanks in advace

[johnbro]

rite lads gona fit the hydro in the soarer the weekend gona get the lines made up dose anyone have pics or vids of this been done like how the y piece ant the back is done and do you take it from the master cylinder to the hydro and then to the rear or just tap of thanks in advace

I'm in the same boat lad I'm fitting my hydro the weekend too,

The master cylinder is fed into the hydro then back to the rear brakes
that's the part I don't really get either
I bought a handbrake kit in murray motorsport but the lines are only like 1 meter each, doesn't look to be enough the lad in murrays said it's standard
Also I didn't get a T peice ???

Help please someone

[lsd32]

Just disconnect the brake line that goes to the rear of the car from the master cylinder and put one of your lines in there,that line is your feed to the REAR connection of the hydro.then the other line goes from the front of the hydro to the rear of the car.you don't need a t-piece as there is already one on the rear of the car.just bleed it out then.I find that the best way is to not touch the wand and just bleed it out with the pedal but everyone has their own opinion on this

[babyeater690]

ye sounds simple enough but i will have to wait and see how i get on yous all better be on hand tomaro if i run into problem

[johnbro]

So If i do that maybe the short pipes would do
Does that mean the foot pedal will only operate the front brakes and hydro for the rear?

[nick180sx]

So If i do that maybe the short pipes would do
Does that mean the foot pedal will only operate the front brakes and hydro for the rear?

you'll still have your rears on the pedal,its just diverted through the handbrake

[cooks86]

Will your normal brakes not be as strong as before. And how did ya get on lads

[twailbait]

Will your normal brakes not be as strong as before. And how did ya get on lads

Your brakes will be exactly the same once its done correctly.

[ste]

ive been told so many different methods at this stage and mines still shit....abs in a car hardly affects it does it.. like i have to hang outta mine and yank it so fast where as frenchy in his mondello vid gives it a gentle tug

[skinnynphats200]

Hydro's are grand and shouldn't coz problem. I haven't had any problem when I fitted but other people have. I will put pictures up of the perfect mounting brackets, strong as fook and super tidy and best of all they only coz €2 a piece and you only need 2 of em, shiny too!!!!!

Straight from the master cylinder to the hydro then just run from the Hydro and tap into the t at the back - a good bleed and you should be in action.........