740cc injectors

[Robbie Daly Ps13]

I thought TDP didn't map Nistune??

Good point John....! Damm how didn't i cop that....! Im slipping up...!

[paulr5]

STiv FTW!!

[darren C]

yes they do... as soon as my z32 turns up it wil be going up to him to work his magic
bump good price on these lads...

[paulr5]

Have a few 180 bits there if you want to do a part x, just darragh is due my next pay cheque,

[darren C]

Have a few 180 bits there if you want to do a part x, just darragh is due my next pay cheque,

what kind of bits have u lad?

[paulr5]

ehhhh what ye lookin for? got td06 turbo, strut braces, exausts, lights, pannels, cams looms, hubs, calipers, giggelin pins, laughin shafts etc....

[darren C]

ehhhh what ye lookin for? got td06 turbo, strut braces, exausts, lights, pannels, cams looms, hubs, calipers, giggelin pins, laughin shafts etc....

done ill take laughing shaft and giggling pin would you have a sky lift by any chance lol

provisionaly sold lad can you get back to me monday lad i wil know if they are gone..

[insejn]

you don't need to max them out like
a lot of lads do 740's instead of 550/555 just so the 555's wont be maxed out, and loads of room for more mods like... correct me if im wrong but havin 740 at say 60% duty is better than 555's at 80 while you're given the same amount of petrol into cylinder ?

[ian g sr20]

you don't need to max them out like
a lot of lads do 740's instead of 550/555 just so the 555's wont be maxed out, and loads of room for more mods like... correct me if im wrong but havin 740 at say 60% duty is better than 555's at 80 while you're given the same amount of petrol into cylinder ?

yes lad u be right in whatt ur saying, reduce th duty cycle of the injector so it wount overfuel etc.

[paulr5]

you don't need to max them out like
a lot of lads do 740's instead of 550/555 just so the 555's wont be maxed out, and loads of room for more mods like... correct me if im wrong but havin 740 at say 60% duty is better than 555's at 80 while you're given the same amount of petrol into cylinder ?

WTF man!!!! im trying to get these for that reason alone
and they will go nicely in the rb25 im building +2 more at about 120 a peice

not gonna argue wit said tuner but that would be my logic???