180sx 5 stud conversion.

[drift student]

gettin 5 stud hubs off a 14, is there anything else i need to swap them too the sil80 or is it direct fit?

thanks
Pa.

[ian g sr20]

direct fit lad, on the front u will hve 2 either drill the holes in the coilover from 12mm to 14mm as the 14 hubs use bigger bolts to hold shock to hub,
save u some time on the rears just unbolt the 4 17'' bolts holding on the bearing to the hub and chage that only

[drift student]

sound out ian, was told before that it was more complicated than that for the 14's!!

[bman rb20]

still waiting to hear back bout them other hubs pa. sure the s14 ones mightn't be so bad so, closer to home.

[ian g sr20]

no lad only done mine bout 2 weeks ago handy out, in my project thread u can see me doin the rears

[sideways boy]

I thought you had to use the bottom ball joint from an S14 on the front too??

[drift student]

according to a driftworks\google search i need s14 bottom arms for the front...

[tweek]

Yeah you need to change the ball joints to s14 balljoints "moog joints" the s13 ones have a different taper on the balljoint

[tweek]

according to a driftworks\google search i need s14 bottom arms for the front...

S14 arms are are about an inch longer than s13 ones you can press new s14 balljoints in to the s13 arms but they are a bit of a squeeze they are slightly bigger

[drift student]

are r32 fronts easy'r to fit then??