r32 skyline diff what fits

[alan opel]

righto lads, im keepin the r32, but this one wheel shite is wreckin me buzz!

now its 5 bolt output, but the front holes on r32's are the big lug type arnt they? so if i got a cased 2 way for a 180sx, woiuld it fit the r32? with the right back plate? or will i have to swap the diff into my casing? cheers lads!

[s15_spec_r]

what if ya got a diff allready cased including the half shafts if would fit? and of course with the proper back plate, but easy switch over the back plates too.

[alan opel]

what if ya got a diff allready cased including the half shafts if would fit? and of course with the proper back plate, but easy switch over the back plates too.

ya ted but finding a 180sx diff would b easier than a skyline one? anyone no? would just b easier to get a cased diff instead of changing it over!

[DeaneMsport_180sx]

shur why dont you just buy a 180 diff then if you need to swap the parts you need over, like the half shaft outputs just pop out and the driveshaft one is just bolted on and id be pretty certain the back plate would just swap over 2

hope that helps anyway

[alan opel]

yea but itd b cheaper to buy a diff on its own, but if a 180sx casing will bolt onto the skyline subframe itd save me changing the casing! i dont wana spend the extra few bob buyin a cased diff if the case is useless to me!

[DeaneMsport_180sx]

ya thats true lad...id be pretty sure the diff would fit anyway...the only difference might be that yours would have big holes to bolt the front of it to the subframe and the other diff might have small ones but i doubt that matters a whole pile...at worst you would need to get longer bolts

i have a 4:3 skyline diff in my 180 and it fits perfect