Follow Us On Follow us on Facebook
Register
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Junior member
    Status
    Offline
    User ID
    714
    Join Date
    Dec 2009
    Posts
    26

    Default Roll cage for a sun roofed 180sx

    Iv been lookin up competitiion rool cages for 180sx and for some reason they dont suit sun roofs!!WHY??Whats the difference?I want to build a pro drift car out of my road 180sx!!I'm a steel fabricator and was thinking of making 1 bt Is that allowed if it conforms to regulations??I read the regulations page and it doesnt say anything about hsving to buy 1


  2. #2
    di Member
    Status
    Offline
    User ID
    123
    Join Date
    May 2009
    Posts
    2,230

    Default

    a sun roof model is 2-3 inchs shorter on the loop over the top
    most lads cut the cage, but it safer with no sun roof bud
    but your gona find it hard to get a sun roof model


  3. #3
    Junior member
    Status
    Offline
    User ID
    714
    Join Date
    Dec 2009
    Posts
    26

    Default

    oh crap!u serious?I was unlucky to end up with a sunroof alrite cuz its bin causing serious probs!Never agen!i tink im not alowd sun roof for drifting either


  4. #4
    Junior member
    Status
    Offline
    User ID
    1648
    Join Date
    Aug 2010
    Posts
    57

    Default

    did u try roco...? he is a site trader here.. as for the sunroof u can just plate it up, he has done loads... hope this helps


  5. #5
    di Member
    Status
    Offline
    User ID
    123
    Join Date
    May 2009
    Posts
    2,230

    Default

    dunnedrifter has a sunroof, but it plated up do
    also got his cage made from roco

    like just there differance between a sunroof model and non sunroof
    but be worth getn a price of roco bud


  6. #6
    Junior member
    Status
    Offline
    User ID
    714
    Join Date
    Dec 2009
    Posts
    26

    Default

    cheers lads!i myt try roco didn realise a sunroof be so much hastle.haha!


  7. #7
    di Member
    Status
    Offline
    User ID
    759
    Join Date
    Dec 2009
    Location
    killarney
    Posts
    1,066

    Default

    i think apex performance do them for sunroof model's.....

    let me know how it goes for you. ill be lookin for one mysely shortly.


  8. #8
    di Member
    Status
    Offline
    User ID
    123
    Join Date
    May 2009
    Posts
    2,230

    Default

    http://www.apexperformance.co.uk/cat...s=cage&x=0&y=0

    there a discount if your with the sxoc


  9. #9

    Default

    Just whip the sunroof out, replace it with a sheet of thickish alminimum, rivet it down, then get a panal beater to isopan it & spray (or do it yourself) Job oxo! then just get a normal cage for a 180sx without a sunroof and it will fit perfect.

    because the motor on the sunroof model makes the height inside 2 inchs smaller hence for a different cage. But if you want to keep the sunroof well you gotta get a custom cage made of search for a bolt it cage for a sunroof model..


  10. #10
    di Member
    Status
    Offline
    User ID
    168
    Join Date
    Jun 2009
    Posts
    3,608

    Default

    the cage in my ps13 is out of a sunroof 180 450euro and its urs has a bolt in door bar on the drivers side so handy for a road car


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •