R33 gtst

[ShaneR33]

it needs a 12v ign feed theres also a couple more inside that are in different places

if your stuck i have both pinouts

right thanks a million for that information.

So if i connect thast grey wire to a 12v ign feed wil it start do ya know. Or will i have to chane the chasis wiring loom.

[japstuff 2]

right thanks a million for that information.

So if i connect thast grey wire to a 12v ign feed wil it start do ya know. Or will i have to chane the chasis wiring loom.

it might need 1 or 2 changed in side the left kick panel the white m63 plug behind the ecu. let me no how u go. u dont need to buy any more bits its just a mater of changing a couple of wires

[karl cp9a]

pm,d.........

[RWDpower]

it might need 1 or 2 changed in side the left kick panel the white m63 plug behind the ecu. let me no how u go. u dont need to buy any more bits its just a mater of changing a couple of wires

Did you put an ignition relay in.

[ShaneR33]

it might need 1 or 2 changed in side the left kick panel the white m63 plug behind the ecu. let me no how u go. u dont need to buy any more bits its just a mater of changing a couple of wires

Ya i've just after compared the spec1 M63 conection with the spec2 one there. Theres about 9 wires extra in the spec1 thats not in the spec2. Have u got any pinout diagrams for this m63 connection.

[japstuff 2]

Ya i've just after compared the spec1 M63 conection with the spec2 one there. Theres about 9 wires extra in the spec1 thats not in the spec2. Have u got any pinout diagrams for this m63 connection.

have both ill send u them soon m8

[ShaneR33]

have both ill send u them soon m8

Right il PM you my email address. Might be handier to email them.