Jr performance sr22

[jamie180sx]

Rite lads at the end of last year and the drifting season over we decided to build the car somewhat different,Firstly we were going to ditch the Sr20 and stick in an RB26 lump,After alot off discussion we decided to stick with the sr block but build it to 2.2 and let it rev to 9000rpm.

So here is how she looked at the end of last year

[jamie180sx]

So first thing to do was to strip the soundproffing out (horrible job) and seem weld and and paint.I wont bore you all with pics of this as im sure we either have done it or seen pics decided to spray it a mix of viper blue and subaru blue.Also it sparyed the cage a custom yellow pics do not do these colours justice






[IMG][/IMG]
didnt turn out to bad as we left the window and everything still in car

[jamie180sx]

Since the engine was out we said while we had paint left we would have to do the engine bay seemed and sprayed




http://i356.photobucket.com/albums/o...x/SNV33074.jpg

[jamie180sx]

NOW for the power plant
since we have some yellow paint left said we would do the Rocker Cover and top of stuts inside and out





major thanks to Philly Suffin body worx(0872067109) for all his hard work and sparyin skill would highly recomend him to anybody

[jamie180sx]

Ok the important bit the short block,Pics of the 2.2 block with Darton 90mm liner kit fitted nice and snug


Custom 90mm pistons

Custom Rods

Rnn14 GTI-R oil pump conversion

Oil pump drive

Cometic 90mm gasket
http://i356.photobucket.com/albums/o...x/SNV33041.jpg
and a set of Acl race bearings
[IMG]http://i356.photobucket.com/albums/oo8/jamie180sx
/SNV33016.jpg[/IMG]
Also have pics of my knife edged crack and i will upload them later

[jamie180sx]

a set of arp head bolts to tighter everything up

as for my head a set of bc 264'' cams(big bastard)


BC valve springs

BC RETAINERS

[jamie180sx]

I also have HKS ADJUSTABLE CAM PULLEYS but as my camera was broke when they arrived i have no pics of that or engine come together

[jamie180sx]

More goodies
greddy oil cooler
A set of skyline front brakes have to make these fit the 4 stud as i dont want to sell my wheels

Toyo R888's

[jamie180sx]

My kkk turbo which came from a Porsche just for a bit of european flavor

my top mount manifold and HKS wastegate

Huge 4 inch intercooler

[jamie180sx]

I also have a greddy plenum intake manifold and im waiting on my custom trottle body so 70mm for now.i have 850cc side feeds(which are for sale)as im upgrading to 1250cc top feed.Still havent recieved so side feed for now.
Tomei Top feed fuel rail