FC3s: BGW Or Not?

Hey quick question to see what ye think..

Should I put a BGW on my FC again or leave it as it is?
When in the auctions in japan it had a crazy carbon one but was robbed off it before it landed here so just replaced it with a original Mazda Aero one raised at the back and have a small lip spoiler for the top of the rear glass..

But always wanted to try a BGW back on it again so what do ye think?

Heres one without any spoiler:
http://i10.photobucket.com/albums/a114/C-Rex/FCTurn.jpg


http://i10.photobucket.com/albums/a114/C-Rex/112.jpg

Then with the raised mazda lip spoiler:

http://i10.photobucket.com/albums/a1...x/FC3s/FC1.jpg


http://i10.photobucket.com/albums/a1...x/FC3s/FC3.jpg


http://i10.photobucket.com/albums/a1...x/FC3s/FC5.jpg

Or as it was in the auctions with a BGW:

http://www.driftireland.com/attachme...6&d=1281977833

http://www.driftireland.com/attachme...7&d=1281977850

Like the one from the Auctions but higher!

Assuming its used for track that is,
The muthatruckin popo might not like it on the road!

[QUOTE=Mick K;151436]Like the one from the Auctions but higher!
[QUOTE]

what he said! but it still looks savage with the lip spoiler too!

Quote:

---

Originally Posted by Mick K

Like the one from the Auctions but higher!

Assuming its used for track that is,
The muthatruckin popo might not like it on the road!

---

Yea this fucker is so heavy on petrol it will rarely see road.

Already have a cheapo BGW got and going about extending out 9" so it will be about 1650mm wide and making custom stands because of the odd mounding points on the FC.. So it will definately be big enough:D

Quote:

---

Originally Posted by C-Rex

Yea this fucker is so heavy on petrol it will rarely see road.

Already have a cheapo BGW got and going about extending out 9" so it will be about 1650mm wide and making custom stands because of the odd mounding points on the FC.. So it will definately be big enough:D

---

Pics of said Cheapo BGW or the Standard GTFO will be issued:p

Quote:

---

Originally Posted by Mick K

Pics of said Cheapo BGW or the Standard GTFO will be issued:p

---

Ill get me coat:o

Pics later If I can find the USB connector for my phone

I'd leave it with the lip spoiler, think a BGW will ruin the look of the car

In two minds myself so I said I see what others thought..
Pics of the not yet big enough gay wing coming soon too..

Ill try find a pic of the double lip spoilers Im running too for a proper comparison

Here is the said BGW..

It will be cut and widened 10inches to match the arches a bit better and custom risers will be made so all that it will have is the basic shape and end caps similar


http://www.driftireland.com/attachme...9&d=1282001037


http://www.driftireland.com/attachme...1&d=1282001073


http://www.driftireland.com/attachme...2&d=1282001089


http://www.driftireland.com/attachme...0&d=1282001054

the one that was on it was a quality one! wheres that gone? the new one there isnt wide enoughlooks too universal.

Quote:

---

Originally Posted by Tekno Twinky

the one that was on it was a quality one! wheres that gone? the new one there isnt wide enoughlooks too universal.

---

Should have read my post so;)

Will be widened by 10inches making it almost 1700mm wide...
And custom risers with a set of fancy adjustable rams like the one that was on it...


It wont be universal looking when Im done..

The one that was on it was either robbed on the boat or in Japan cause I was there to see it drive off the ship without it:mad:

Hmm, i dont like a wing on it. Doesnt look right, makes it look like a 180?

Spend the money on spacers and some smaller tyres ;)

Quote:

---

Originally Posted by PeterT

Spend the money on spacers and some smaller tyres ;)

---

Or 18x10s;) Hopefully in the pipeline.. 17s look way too small on it and they are already on 25mm spacers:o

like da wing
the small spoiler is also a nice touch

i think the spoiler looks well on it in the auction pics, think its mainly th positioning of it of the back of the bootlid that makes it work would look epic wider and a tad lower than in the auction pics imo

no wing , lower it and spacers on the rear

Smalls Mazda wing i think...

Although, suppose as you have the cheap wing already you might as well mess around with it and see how it looks after that as all it will cost you is alittle time and effort:)

I don't think going very high with the risers is a great idea either though. Just maybe abit extra in length to make the car look abit longer and play on its stance when you get wheels that fill the arches abit better.

Very nice car either way though!

BGW all the way lad it will give it a very nice stance and look

DaveM-sport: Thats what Im thinkin alright have the BGW so might as well mess around with it a bit now, if it looks shite its only a bolt off job anyway.. Once Ive it on Ill get some new pics up..

bgw suits it better imo Paul

go for it paul, i tink looks the job, set the car of nicely,
get few photos up when your modifing the wing

what rims you going for? 18x10 :D:D

Id say I will lads just got lazy doing it now as Im cleaning uo the engine bay.. Have an aluminium cooling plate made and the intercooler and all the water pipes off for polishing:cool:

BGW will be done for Japfest though:)

John: You'll see the wheels if I get them;)

BGW All the way lad, Savage looking rex.

Have to get pics up of it now since its got 10inches wider:D