well as seen as my road car has no backplates or shoes,i decided to save the hassle and fit a hydro i had at the house and its nct friendly:D
http://i243.photobucket.com/albums/f.../Photo0351.jpg
Printable View
well as seen as my road car has no backplates or shoes,i decided to save the hassle and fit a hydro i had at the house and its nct friendly:D
http://i243.photobucket.com/albums/f.../Photo0351.jpg
wat hydro:confused:
x2
Unless its hidden under the standard handbrake surround ?? :D
done so well u cnt even see it ha:D
sweet ! did u put it inside the original casing /plastics !! ?????????????
nice hydro lad
give that man a can of cokeQuote:
Originally Posted by Aidan Hogan
yeah i took apart the hydro and welded the base to the standard handbrake
then made a bracket and welded it to the standard handbrake to recieve the
balljoint from the cyclinder
delighted it mounted ok cause iv being putting off sorting out shoe's,backplates and cables to fit the z32 brakes
http://i243.photobucket.com/albums/ff24/Davie210/h1.jpg
http://i243.photobucket.com/albums/ff24/Davie210/h2.jpg
u crafty crafty man
that is fukin cool:D
nice job man! Can you lock it atal lyk a normal hb?
why thank youQuote:
Originally Posted by sil80drifter
yeah its still standard just pushing a cyclinder instead of pulling a cableQuote:
Originally Posted by DOC23
i just have to fit the braided lines when they come
Yes go me :D
Smart thinking though !!
So if they test the handbrake in the nct , as in just make sure it works when they're inside , will it work the same way as a standard handbrake :cool:
Now that is impressive................fairplay......is there someone doing these already?? Cause i could see you maiking a few bob if your clever about it!
works the exact same, i did have to butcher the center console pockets to get it to fitQuote:
Originally Posted by Aidan Hogan
ya see this is the shit im thinking up when i should be hanging doors or doing something stupid at work:D
I want one! how much :D
That fair tasty Davie well done ,
Could make a few euro sellin these,
This could be your new work :D ;)Quote:
Originally Posted by Davie
Very impressive man!!!!
very nicely done!!
exactly what i want in mine, savage work
ditto. i think you could make a few bob if you make up a few and tour around and fit them :D you'd be just like a rockstar!Quote:
Originally Posted by PeterT
drift student on here has pretty much the same set-up and it looks smashing too!
good work dude..was smart thinkin
That is excellent I must say, would be the job for anyone who only has the one car for road and track!
nice job man!
:) :) :) .........Quote:
Originally Posted by nissan_doctor
well done davie now thats proper thinking. got my turbo:):):)
Tasty job...:)
Quote:
Originally Posted by git
I'm sure I could talk davie into doing it on yours if you want;)
Don't they check the handbrake cables in the NCT?
Or are you leaving the cables in place for this very purpose :)
how very james bond of you. well done:cool:
Hahaha just what i was goona say!!Quote:
Originally Posted by thegosson
Good work!!
Cool job.what is itQuote:
Originally Posted by nicko
money talks lolQuote:
Originally Posted by nissan_doctor
not sure about all the in's and out's but I'm pretty sure all that's needed is a lock and release handbrakeQuote:
Originally Posted by Larryk
I wouldn't go that far..... Probably just tour the east coast lolQuote:
Originally Posted by eileen
I'll name it the 007 handbrakeQuote:
Originally Posted by thegosson
cheers everyone for the good feed back
I might be doing another soon.
Going to try with near zero cutting of the console
Nice work, everyone will be doin this now!
that is sweet as!!
though in the event of the manufactures thoughts when coming up with the brainwave of an emergency break operated by a seperate system than the system that isnt the emercency 1..what happens?
GEAR DOWN AND DUCK FOR COVER!
ha its pretty dangerous but its win!
But sure what about all the track carsQuote:
Originally Posted by Tekno Twinky
and lads removing there standard handbrakes for hydros
maybe I shouldn't of sold my cage lol
looks the job, if ya could do them without chopping up the consoles EVERYONE would want one! :cool:
niiiiiiiiiiiiiiiiiiiiiiiiiiice clever chap i see this taking off
i had this done a few years back on my drift car because i did not have the money to buy a ready made one it worked well but with the short lever you will have to give it a good tug make sure the piston is being pushed back straight. nice job i never thought my one would fit in the concole.