Mappers feedback

Printable View

Show 40 post(s) from this thread on one page

28-06-10, 12:56
Bobbys14

Mappers feedback

Well getting the car mapped, was going to get nistune but i bought a d-jetro to do away with afm to save any trouble, who would you's recomend westward is only 4mls up the road and couture bout 10mls some people may have bad experience i'd kike to here your comments!

Cheers
Bobby
29-06-10, 08:40
gofaster_s13

http://www.klingon-empire.org/photop...an-o-worms.gif
29-06-10, 09:24
nissan_doctor

Martin treacy(westward) is good, but Robbie at TDP will get best results once your car is in good health.
29-06-10, 09:30
carpo

robbie @ tdp all the way best man around for the job..
29-06-10, 09:58
gem-s13

tdp...............
29-06-10, 17:12
S13..KEV

TRACK DAY ALL THE WAY:D he did my car and while i am writeing this out would like to thank robbie brendan stone and all at T.D.P
29-06-10, 17:15
CarlCF4

TDP, cant bate em
29-06-10, 17:59
alan sinnott

tdp robbie is the only man.
29-06-10, 18:06
chrisbrady325

Richard Bradley- Bradley Motorworks new to the mapping game but know's his stuff best man for the job!!
29-06-10, 18:10
Chuck_g

Quote:

Originally Posted by carpo

robbie @ tdp all the way best man around for the job..

Agreed.................although he gave you a couple more 100 Bhp :p he he he
29-06-10, 18:12
ian g sr20

not sayn tdp r bad but iv heard bad stories out of thr, r is that just the lads that are driving the cars not robbie and the lads?
29-06-10, 18:18
Chuck_g

Quote:

Originally Posted by ian g sr20

not sayn tdp r bad but iv heard bad stories out of thr, r is that just the lads that are driving the cars not robbie and the lads?

Every place has horror stories, before i went to Robbie i believed the bad shite but he knows his stuff and thats all that matters!! ;)
29-06-10, 18:22
Dunnedriftin

Just look at last weekends prodrift top 3 finish's, look at the cars & who mapped / built them & then you should have your answer!
29-06-10, 18:24
yowdy

Quote:

Originally Posted by ian g sr20

not sayn tdp r bad but iv heard bad stories out of thr, r is that just the lads that are driving the cars not robbie and the lads?

lad it doesnt matter who the mapper is they all have horrer stories,,its the amount of good results that out weigh the bad ones you need to listed to
29-06-10, 18:33
barryl

TDP all the way;)
29-06-10, 19:00
ian g sr20

im not sayn anything bad bout robbie nly just sayn wat iv heard, not sayn thats true either just wanted 2 put it out their
29-06-10, 19:09
robbie@tdp.ie

Quote:

Originally Posted by ian g sr20

im not sayn anything bad bout robbie nly just sayn wat iv heard, not sayn thats true either just wanted 2 put it out their

If you don't know it's true you should say nothing.

@ chuck you need a tdp.ie cnc cylinder head for the extra few bhp:)

Robbie
29-06-10, 19:10
Chuck_g

Quote:

Originally Posted by robbie@tdp.ie

If you don't know it's true you should say nothing.

@ chuck you need a tdp.ie cnc cylinder head for the extra few bhp:)

Robbie

Next year my man, next year.............:D
29-06-10, 19:24
P.s13 silvy

anything to be said for couture outside Dunboyne lads???
29-06-10, 19:33
CarlCF4

Quote:

Originally Posted by P.s13 silvy

anything to be said for couture outside Dunboyne lads???

not much...
29-06-10, 19:43
ian g sr20

like i said already im not sayn a bad word bout u just asking a question
29-06-10, 20:14
Bobbys14

i'v heard people complain about tdp but notting to the amount of good reports i'v heard, as said there is someone that wouldn't be happy but that shouldn't go down on paper as a bad service just an unhappy customer!! westward is close to me which would be handy but i'v been tinking if i want a first class job it is tdp i'll have to travel to, i knew the thread would have went in the favour of tdp because of the smount of drifters using them with happy results..

So robbie can you pm me a rough price just a guide line please

Also am i missing anything i'v:
Forged pistons
Acl bearings
Head Gasket
Arp bolts
Gt2871r
Tomie 740cc
Trust fmic
Apexi intake
splitfire coil's
apexi d-jetro
Act clutch
Hks evc6

Do i need FPR:confused: or anything else?
29-06-10, 20:37
robbie@tdp.ie

Quote:

Originally Posted by Bobbys14

i'v heard people complain about tdp but notting to the amount of good reports i'v heard, as said there is someone that wouldn't be happy but that shouldn't go down on paper as a bad service just an unhappy customer!! westward is close to me which would be handy but i'v been tinking if i want a first class job it is tdp i'll have to travel to, i knew the thread would have went in the favour of tdp because of the smount of drifters using them with happy results..

So robbie can you pm me a rough price just a guide line please

Also am i missing anything i'v:
Forged pistons
Acl bearings
Head Gasket
Arp bolts
Gt2871r
Tomie 740cc
Trust fmic
Apexi intake
splitfire coil's
apexi d-jetro
Act clutch
Hks evc6

Do i need FPR:confused: or anything else?

I take it you have a good fuel pump. We charge 450 in vat. The price might be higher than others will quote but the results we get speak for them selves.

To book in please contact our office.

Robbie
29-06-10, 20:41
Driftma

I got my car done down with robbie and i'm very happy with the results:D
29-06-10, 20:42
Bobbys14

Quote:

Originally Posted by robbie@tdp.ie

I take it you have a good fuel pump. We charge 450 in vat. The price might be higher than others will quote but the results we get speak for them selves.

To book in please contact our office.

Robbie

Oh yeah have a walbro 255, should i get a FPR or is it needed?
29-06-10, 20:56
bnollie

Quote:

Originally Posted by Bobbys14

Oh yeah have a walbro 255, should i get a FPR or is it needed?

get one lad you will need it
29-06-10, 20:56
robbie@tdp.ie

Quote:

Originally Posted by Bobbys14

Oh yeah have a walbro 255, should i get a FPR or is it needed?

STD fuel pressure should be fine with 720cc injectors. Is the pump a 341 or 342 ?

Robbie
29-06-10, 20:58
robbie@tdp.ie

Quote:

Originally Posted by bnollie

get one lad you will need it i assume you have a good boost controller?

Why ?

Robbie
29-06-10, 20:59
anto180

pm their robbie!!
29-06-10, 21:00
Bobbys14

Quote:

Originally Posted by robbie@tdp.ie

STD fuel pressure should be fine with 720cc injectors. Is the pump a 341 or 342 ?

Robbie

Haven't a clue robbie only know its a 255lph what's 341/342 mean?
29-06-10, 21:13
robbie@tdp.ie

Quote:

Originally Posted by Bobbys14

Haven't a clue robbie only know its a 255lph what's 341/342 mean?

The 342 is the only true 255 litre pump.

Robbie
29-06-10, 21:15
Bobbys14

Quote:

Originally Posted by robbie@tdp.ie

The 342 is the only true 255 litre pump.

Robbie

Is this stamped on it or any way to know? might take it out to check..
29-06-10, 21:22
robbie@tdp.ie

Quote:

Originally Posted by Bobbys14

Is this stamped on it or any way to know? might take it out to check..

Yep under the black rubber it should say walbro 341 or 342

Robbie
29-06-10, 21:25
Bobbys14

Quote:

Originally Posted by robbie@tdp.ie

Yep under the black rubber it should say walbro 341 or 342

Robbie

Thanks robbie, Hope to get in very soon..
29-06-10, 22:35
Greg

Another vote for Robbie. Not that it's needed. :D
29-06-10, 22:57
Frankae86

Alan Sinnott suggested Robbie to me to machine and map my engine and im VERY happy with the results, wouldnt go anywhere else in future!
30-06-10, 00:00
nissan_doctor

Quote:

Originally Posted by P.s13 silvy

anything to be said for couture outside Dunboyne lads???

Lots, but if you have nothing good to say then you should say nothing at all, so...................
30-06-10, 00:17
SRray

Quote:

Originally Posted by nissan_doctor

Lots, but if you have nothing good to say then you should say nothing at all, so...................

Iv had several cars mapped(mainly sr20s:)/4efte's:rolleyes:)with the crew at couture auto and never had any problems,mapped on the rollers and on the road,nick also given his backing to alan lenihan this year with a nice spec sr20det.Im dealing with them 5years or so and Im a fussy fu*ker but always happy with the sevice they provide;)
30-06-10, 00:38
nissan_doctor

Quote:

Originally Posted by SRray

Iv had several cars mapped(mainly sr20s:)/4efte's:rolleyes:)with the crew at couture auto and never had any problems,mapped on the rollers and on the road,nick also given his backing to alan lenihan this year with a nice spec sr20det.Im dealing with them 5years or so and Im a fussy fu*ker but always happy with the sevice they provide;)

In the immortal words of Basil Fawlty....'a satisfied customer! We should have him stuffed'

:p
30-06-10, 09:30
PeterT

TDP rep is just getting better and better. It wont be long before any negative memories are washed away!

Ive never had anything mapped, but its Robbie i'll be bringing the cefiro to after my next pay day!

Show 40 post(s) from this thread on one page