Printable View
Well lads! want to make the skyline blow off air but with a nice loud sound!
was looking at vids of chasers with flutters??????????????
and whats a compresser surge?? seen a vid of a sr20det with 1 and sounds unreal!
info on this or how,where and how much is 1 of these are
thanks
take off any after market dump valve or standard dump valve and it should do it
its totally standard? just take it off altogether?? i think its going threw the filter at the moment
You need to run big boost to be able to get it loud.
Robbie
oh ok. what about just a chatter or flutter like on the chasers?Quote:
Originally Posted by robbie@tdp.ie
ill try get a vid
heres 1 of the vids
http://www.youtube.com/watch?v=tUzTIJW0WqE
2nd 1 but i think this car is running big power
http://www.youtube.com/watch?v=LZUbo_mNDZM
and heres 1 on a skyline
http://www.youtube.com/watch?v=adizt4ZXwrA
Standard dumpvalve and a gud mesh filter
thats an apexi filter on it? i reli want it like the last video!?
no dump valves and a stainless pipe between the turbo and dump valve should make it louder
http://www.youtube.com/watch?v=hEK7POxpVeE
The reason that the chatter is so loud is that fact that the turbo runs so much boost 2.5 bar. Its really hard to get a loud sound without boost.
Robbie
That skyline in the last vid sounds hilarious:DQuote:
Originally Posted by Prodrifter86
an apexi induction kit will give you this sound. my gtr sounds like a transformer going down the road
reli shane? i cud get it sounding like the last vid id love it even if it wasnt loud!Quote:
Originally Posted by thegosson
Podge is on the button,remove/block off all dump or recirculating valves and use a straight metal intake pipe between a mesh filter and the turbo inlet and it'll sound like that,just maybe not as loud...Simple and cheap really and sounds much better than a dump valve!
iv got all stanless steel boost pipes and a stanless steel elbow coming off a hks mushroom filter and runnin round 1bar boost and the noise is savage off it
might try that so! i reli want that howl! lolQuote:
Originally Posted by will_c
Are you running a standard turbo? RB25 Skyline?
AFAIK, the standard turbo will not care for this sort of fettling hehe
no rb20? ha! it wont take bringing a different pipe to the filter???????Quote:
Originally Posted by richy
What he means is its very hard on your turbo,Quote:
Originally Posted by Prodrifter86
dumping the pressure back through turbo stalls or even reverses the turbo
thats the pidgeon noise you hear. It will shorten the life of the turbo...
http://www.youtube.com/watch?v=LqMzK...eature=related
kind of hard t hear it but in dat video its mad sound :D:D
No no, blocking off the dump valve. The compressor blades are pretty brittle.
Ill check over on skylineowners, i think theres a few threads about doin this ;)
oh ok! so just to clarify with every! on the first page on my 4 or 5th post its the last video i would like my car to sound like!
Its sounds like its laughing or sniggering hahaQuote:
Originally Posted by Wolftown
I think what you are looking to do is the "Pigeon Mod" where you block off where the dump valve would be and forceing the air back through the turbo afaik
But as said this may shorten the life of your turbo........its like the opposite of anti-lag haha
turbo chatter ha ye finest examples are on group a rally cars weather it be on the ring of kerry or nippin around monty carlo, youll here it constant on approach to corner entry as there keepin on the boost , bovs mainly increase lag time, but as that last lad sed it narrows the life of the blower, first signs of oil n tip damage bearing noises, n so on but sure hey who cares sweet sound less lag love my datsun
yeah lad! that was the plan! going back to the rallying routes was going to try do the group A cars but i like the pigeon sound! hahaQuote:
Originally Posted by okachan
Tbh on relativly standard car and turbo it won't shorten the life of the turbo a noticable amount..it's only when your running a turbo that produces massive airflow that you really need to be worried. Go for it,sounds class!
yeah im thinking strongly about it
The way the rb20 intercooler set up works means an sr will always make a louder chatter with similar mods. But start off with removing any type of dumpvalve, install a FMIC, and if your bothered , a stainless suction pipe. That will get you a bit of noise!
nice thanks pete!!!!!!!!!!!!!!:DQuote:
Originally Posted by PeterT
if im in tullow sat and u there u can here mine
yeah no bothers lad! not sure if im going yetQuote:
Originally Posted by podge