help ca18 scutter

right lad me first dirfter stuck out on drive with last 3 monthsactin the whore i gave up on it as i no feck really bout them.

it all started when headgasketwent ,a friend of mine sorted it, grand lovely, two days laters go up to get car and its out two teeth thanks to them messin round,sorted timing again but then she was turnin turnin turnin, picks up eventually barely idling .

the only way to get it to build revs is on and off throttle gradually buildin it up back firing and throwin flames???

anyone any idea???
was thinkin coilpacks anyway.

is there anyone can sort this so i can get bit use out of it til i get money for an sr20

thanks for any help wat so ever:)

wher are ya lad??

Quote:

---

Originally Posted by DRIFTER

wher are ya lad??

---

south tipp no one have them round here she not best yoke but she do until i finish one project first

im in south tipp meself, wher bout are ya ? pm if ya want, might be able to help ya out..

lovely thanks pm your way..

sounds like da coils man,
they are prone to go in them

Its likley there is still something wrong with the timing or head. Did you get the head skimmed or just throw a new hasket on it?

the boys, just threw in new gasket he took change
was worryin in something inside

ALWAYS get the head skimmed when changing the headgasket!

that very well could be your problem

thats wat i normaly do but no feck all bout them say time to strip it down and try it myself cnt get any worse like an orniment in front yard

I'm from Cashel myself have some experience with them.

Start from downloading a factory manual so you know what you're doing.
The coilpacks might be at fault
Check that the cam timing is spot on (bit tricky on these, best method is to count the teeth). I wouldn't be surprised if you bent the valves if timing was out so I'd do the compression test then.
Another suspect is the igniton timing as the boys had to remove the CAS in the process.
Also various vacuum leaks on the intake side due to "false economy approach" won't help
Did you connect the wiring properly as it's easy to get two sensors wrong (I think bright green and yellow look similiar enough and plugs look same). If you did you fried one of them and it won't run well.

You gonna have some work for the weekend then;)

Might be also something simple

Or sell it to me as it is:D

it be more in ur lines to put 4 trolley wheels under ur seat for wen it falls thru the rust i mean floor :D

sorry there grimix were not talkin bout you old cam here, the floor in that was like lookin out at the waves in tramore, would make ya sea sick, there certain points on every car to jack a car ;)

thanks for you concern tho :D

wat would u no bout my cam and i put d seat in urs so seen and laughed at all the rust

i no ya cant drive it thats for sureyour more than welcome to show me this (rust) below the seat

so did you find out what the problem was??

no lad havin got the time busy busy tank god