R33 gtst s1

so i picked up a spec1 r33 last week in cork. for an apsolute steal going by todays values. it is a bit rough round the edges. but has a few small bits under the bonnet. and even came with a brand new set of brides that ar as fake as pamela andersons knockers, a genuine nardi steering wheel that i came across in the boot buried under loads of parts, and a fake momo wheel on the car, witch pizzled me a bit?

anyways here is a few pics, not much to look at, but will do the job for a few drift days during the summer. then i will be pulling engine and box out to drop into my rx7 after the fun is had..


http://i1317.photobucket.com/albums/...pso4m0i9bu.jpg
http://i1317.photobucket.com/albums/...psgcbgsuxp.jpg

Nice buy pal a mate of mine that I worked wit owned it nd doubt he ever even threw it sideway. Well wear wit it

thanks lad it isnt a bad old motor....going to sort out a few bits that need doing. bigger injectors, z32 afm, mani and then map it with nistune. run a bit more hp then.

Best of luck with it. Not many about in the colour! Lovely car

Nice find! Rare in red I'd imagine. Like the colour myself.

tanx lads....its a respray job. was a burgendy color before(most discusting colour the 33 came in)....but everything bar behind light pannel at the back of the car was painted red doors engine bay etc is all done.

its very nice in red.. any big plans for the car set of wheels etc ?

thanks lad. no not really any big plans for it.....i originally bought it to pull the rb25 and gearbox and loom out and drop all into my fd3 and break the rest. engine wise it is a sound car but the bulk heads are a bit worse for wear. but skyline r33s are known for rotting away there. il drive it and drift it at a few events over the summer and crack on at the rx7 over the winter time.

im gathering a few bits up here and there to get engine mapped. will be happy to see 350hp out of it.

Love these in red. Health to drive.

So for an update on this thing, i raffeled off my rx7 (love it or hate it, i didnt want people wasting my time) i just came to terms and realised that it was far too clean to do what i originally set out to do(drift it) and cut my losses before i got too deep into a money pit. i had actually bought the r33 to do an rb25 engine conversion on the rx7. but the calculator came out and the end figure was just insane. anyways Trevor Murphy Won the car. Hopfully it will see a road soon, it will be getting a 13b transplanted back in. But anyway more to the point, i havnt realy got much time for the r33 to be honest, between working and family. but i am getting there. plan to have it running without any faults by the end of February (had originally tought id have it going for a few days out over the summer...iv had a bit of time to get it sorted. theirs not much left to do, kinda loosing intrest in this one aswell as it just seems like a never ending money pit like any other car i buy....


was driving it for a bit, then this happened....
http://i1317.photobucket.com/albums/...ps4nnevzwl.jpg
soooo i blew the clutch, pressure plate shattered and busted an 8inch hole trough the side of the bellhousing.... which resulted in having to replace a clutch, flywheel and box. i had an unlknown aftermarket clutch kit in it. only after dropping the box i discovered it was an XTD clutch kit, googled it, and supposibly common for them to just explode under load. not a good item to buy if you want to keep your
legs. so i went and put an exedy clutch, nismo lightweight flywheel and a rebuilt box back in.

http://i1317.photobucket.com/albums/...psvxlkarua.jpg
http://i1317.photobucket.com/albums/...psspxjfzwu.jpg

new clutch kit
http://i1317.photobucket.com/albums/...ps24odjy5k.jpg

i have a thing for the color red :o
http://i1317.photobucket.com/albums/...psbcijgumv.jpg

i now have all the parts i needed to get it ready for mapping....

it will be sent to stiv in MDTuning as iv read and heard alot of gud reports about him. it is going to be mapped on a Nistune Chipboard and il be running it on a 300zx ecu.

that dreaded parts list that i tought would never end....
what i have so far,

-Walbro 255lph pump
-Gtr Coilpacks
-Nismo 555cc injectors
-Nismo Adjustable Fuel Pressure Regulator
-Metal Headgasket
-Aluminium Rad
-New Frontmount Intercooler With new Pipework
-Forge Dumpvalve
-Toyosports Bottom mount manifold - impulse buy! doubt it will last a wet week!
-HKS Adjustable Actuator
-Apexi SuperSuction filter kit
-Screamer Pipe
-3 inch Downpipe
-Straight pipe
-Dmac Touge Shotgun pipes
-Cusco 2way diff
-Apexi A-VCR boost controller
-Defi Racer Gauges
-Bee*r Rev Limiter
-Hks Turbo Timer
-Exedy Clutch Kit
-Nismo Lightweight Flywheel

All genuine filters for service aswell.

-Recaro Carbon Kevlar Spg on Bride Rail
-Recoar Speed Recliner For passo side
-Takata 5point Harness
-Nardi deepcorn Wheel
-Driftworks hydro Handbrake with knuckle duster handle
-Japspeed Front Camber Arms
-Japspeed Steering Arm Tie Rods
-Japspeed Tie Rod Ends
-Japspeed Superlock Tension Rods
-Driftworks Offset Rackspacers
-Solid Subframe Bushes
-Gtr Quantum Coilovers up Front Bridgestone NPG Coilovers in the Rear

interior pic.....
http://i1317.photobucket.com/albums/...psplrowibh.jpg


painted rocker covers and fitted mani
http://i1317.photobucket.com/albums/...pswev9cdta.jpg
http://i1317.photobucket.com/albums/...psavotjqff.jpg

got rid of the old fmic, for a new one bigger core and pipework directed a different way.
old one..
http://i1317.photobucket.com/albums/...pslnn4mnpn.jpg

new one..
http://i1317.photobucket.com/albums/...ps5zruvcth.jpg
http://i1317.photobucket.com/albums/...ps9jftcava.jpg
had to order bushes for the front coilovers off quantum, i boght these coilovers 2nd hand and the bushes were missing. could not get over how much qunatum wanted for 2 bushes, 1 on each coilover.....140pound stirling for 2 of them :eek:

i may be interested in selling the rear quantum coilovers if anyone is interested.
these are supposibly the best coilover money can buy for an r33 gtr going from reviews on gtr.co.uk. starting price on the is 3000pound stirling from what iv read aswell.

exterior wise, it will be staying similar to how its looking now....just until i get some more seat time.
done a general tidy up of the weather worn paint underneath
http://i1317.photobucket.com/albums/...psyp4oqwlu.jpg

pulled the loom up over the arch liner so i could run the car a bit lower
http://i1317.photobucket.com/albums/...psbjivbbui.jpg

DIY'd up a splitter from the womans old accord cl7 rear bumper.
http://i1317.photobucket.com/albums/...psjp1cowdw.jpg

fitted a nismo style bonnet vent i bought from the lads at tyrehangar.
http://i1317.photobucket.com/albums/...psmopkvdpm.jpg
http://i1317.photobucket.com/albums/...ps2efxj0bp.jpg

painted it up, made some headlight eyebrows to give it a bit of agression, the spec 1 r33 is pretty boring loking in my opinion. also tinted the headlights.....
http://i1317.photobucket.com/albums/...psiykfqobb.jpg

i have a set of full GTR overs to go on the rear, have some 50mm rivit on arches to go on over the gtr's and on the front arches i plan on cutting the steel arches and putting rivit on arches, i picked these up from the lads in tyre hangar aswell, the wuality and fitment on all the fiberglass they sell is perfect quality. il eventaully be running my Work VS-XX wheels after i get dishes bought, they will be roughly 18x13 on the rear and 18x10.5 up front. just for looks :). still need to modify the hubs on for some more extra lock.

tyrehangar gtr overs
http://i1317.photobucket.com/albums/...ps5lqi0fif.jpg


this is the cars current state, i know the red sun visor is marmite, but i like it. and thats all that matters, right? :cool:
http://i1317.photobucket.com/albums/...psofh8fnja.jpg

http://i1317.photobucket.com/albums/...pstrp0zahg.jpg

http://i1317.photobucket.com/albums/...pswi9znvqi.jpg

http://i1317.photobucket.com/albums/...ps8jkcvnhq.jpg

have a Dmac wing blade i am currently getting legs made up for, it will be replicating the BigCountryLabs wing.

its currently sitting low mounted, which i actually like...
http://i1317.photobucket.com/albums/...psuvustzkn.jpg
http://i1317.photobucket.com/albums/...pstv9mn4vl.jpg

thats all the updates i have so far....will get more as i go along.

I think the sun visor looks deadly! Good match on the visor and paint! That wing is enormous!! Also, lovin the jap plates

It was all going great til the bolt on arches but you'll need them to cover the wheels I suppose.

I still think you should sell me the SPG :D

Quote:

---

Originally Posted by tomdh

I think the sun visor looks deadly! Good match on the visor and paint! That wing is enormous!! Also, lovin the jap plates

---

yeah it was a good enough match, the car is a basic enough red...i bought an off the shelf aerosol can to paint the bonnet vent and color match is perfect lol. the wing blade is quite big, its is almost the width from both ends of the mirrors of the car.

Quote:

---

Originally Posted by mk2glenn

It was all going great til the bolt on arches but you'll need them to cover the wheels I suppose.

I still think you should sell me the SPG :D

---

ah i know lad, not sure on them myself. but i couldnt do much otherwise. because i want to run big wheels. and theirs no other type arches that i was 100% on.

ha no im keeping the recaro. what would you put it into ;)

Quote:

---

Originally Posted by Andrew200sx

yeah it was a good enough match, the car is a basic enough red...i bought an off the shelf aerosol can to paint the bonnet vent and color match is perfect lol. the wing blade is quite big, its is almost the width from both ends of the mirrors of the car.



ah i know lad, not sure on them myself. but i couldnt do much otherwise. because i want to run big wheels. and theirs no other type arches that i was 100% on.

ha no im keeping the recaro. what would you put it into ;)

---

Be fun keeping tyres on the rears :P

You know me, you'd never know what I might have for it :D

Quote:

---

Originally Posted by mk2glenn

Be fun keeping tyres on the rears :P

You know me, you'd never know what I might have for it :D

---

ahhh tell me about it, i havnt ordered dishes yet, want to sort body work and get steering set up first and see what size wheels to run next. worked it out that it would take an 18x13 to fill the arches. will run a 315/30 tyre if i go for them sizes in the rear.


well id say u have something already. seen the wanted add on facebook lol. looking for a set of dishy 5x114 fitment wheels are we lol :P

Quote:

---

Originally Posted by Andrew200sx

ahhh tell me about it, i havnt ordered dishes yet, want to sort body work and get steering set up first and see what size wheels to run next. worked it out that it would take an 18x13 to fill the arches. will run a 315/30 tyre if i go for them sizes in the rear.


well id say u have something already. seen the wanted add on facebook lol. looking for a set of dishy 5x114 fitment wheels are we lol :P

---

315/30 will be mental money lol

I haven't anything already and the wheels were for Duffys Tez hehe

Small update... got my wing legs made up locally. 5mm aluminium. did a drawing up from nothing realy. turned out its Fu*k!ng masive on the car, to the point that it just looks stupid. but i like it :)

http://i1317.photobucket.com/albums/...psjdtzq8ci.jpg

http://i1317.photobucket.com/albums/...ps5sif29na.jpg

http://i1317.photobucket.com/albums/...psentm8nz0.jpg

also fitted front arches, not 1 bit happy with them. from the front of the car they are wavey and out of shape. very hard to get a picture to show how bad they are..

http://i1317.photobucket.com/albums/...ps0pri2eaa.jpg
http://i1317.photobucket.com/albums/...pstxgijd9e.jpg

might do a job on them, have in mind something like this, bare in mind it isnt going to be a show poney...
http://i1317.photobucket.com/albums/...psw0rgvpee.jpg

Mother of god that wing is huge!! Looking good tho man!

thanks man, i never intended on manking it so big. mis-judged the mesurments.