GAUGING INTEREST: High Spec R32 GTR

Hey guys,

Unfortunately due to many factors I have to consider parting out with or selling my R32 GTR :mad:
She is currently up in Paul Wray Motorsports getting the new engine fitted, mapped as well as getting a full health check where any parts that needed attention have been replaced/repaired to the highest standard.

I will post pictures later but I think I have an out of date build thread on here somewhere that will have some pictures for now..

Here is the spec and a rough idea as to the pricing I am looking at;
RB26 built by RENIK on standard R33 GTR V-Spec engine - €5000 (bought from Japanese Performance for over €7k, engine is just being installed, has not been driven since purchase)

- Oversize forged piston kit

- Fully Forged Internals

- N1 Camshafts

- Tomei Slide cam pulley

- 1.2MM Metal Headgasket

- Trust high capacity Sump

- Uprated timing belt kit



HKS GT-SS Turbochargers - €1200

Nismo 550cc Injectors - €500

Walbro 450lph Fuel Pump - €100

A Genuine Z-Tune Carbon Bonnet with 2 centre grilles for optimal release of hot air from bonnet, includes removable undercover, - €250

6 DEFI Gauges to cover all main performance areas + link controller and recording unit, - €1000

2 HKS High Flow Turbo Elbows - €75

TommyKaira Gear Knob, - €25

TopSecret manifold, - €150

Trust Turbo Hard Pipes, - €50

HKS Blow Off Valve on Hard Pipe, - €125

Carbon Fibre N1 Lip Spoiler, - €100

HKS Kansai Rear Strut Brace, - €75

HKS Kansai Underside Strengthening Beams. -€75

R33 GTR V-Spec Gearbox running Redline Shockproof Heavy Oil - €250

Exedy Twin Plate Clutch & Flywheel (rated to 750hp) - €600

Genuine N1 Water Pump 01/09/2012 - €75

Apexi Power FC & Commander - €450

Greddy Oil Cooler - €150

Greddy Oil Filter Relocation Kit - €75

Splitfire Coilpacks - €200

Updated Spark Plugs

Standard R32 GTR Front & Rear differentials running Redline Shockproof Heavy Oil - €200

JapSpeed 50mm Radiator - €75

Standard FMIC (capable/ideal for power of 600+hp so no need to upgrade) - €50

HKS Downpipe - €100

TSC EVO 4WD Controller - €50

Blitz Nur Spec exhaust system - €200

HKS Super Suction Pod Filters

Phormula KS-3 Knock Alarm

Twin RB25DET AFM’s

All Intake, Manifold, Exhaust related Gaskets Replaced 01/09/2012

All Turbo Gaskets & Bolts Replaced 01/09/2012

All perishable pipes/hoses that were weak replaced while engine was out 01/09/2012



18 x 9.5” Ultralite Nurbergring all round - €550

Toyo T1S 245 40 R18 all round

Brand New HSD HR MonoFlex Coilovers (8kgfr & 7kgr) - €500

K-Sport big brake kit front and back – 8pot front 4 pot rear - €1500

Carbon Lorraine RC6 pads front

Carbon Lorraine RC5+ pads rear

SRI Front & Rear Strut Braces

R33 GTR Brake Master Cylinder

DriftWorks Hicas Lockout bar

DriftWorks Camber Adjustable Upper Links

Tein Castor Adjustable Front Tie Rods

Brake Master Cylinder Stopper




shell €1500

Full, Engine Out Respray in KH2, Gunmetal Grey Metallic – Complete on 01/09/2012

2 Stage Polish Carried Out By EliteAuto

Full Paint Protection Using C-Quartz

Underseal Treatment Carried out by RetroCars

Cavity Wax Teatment Carried out by RetroCars

Immaculate Seats - €400

If anyone has any interest in the car as a whole unit please feel free to contact me here.

Thanks.

This is the only PhotoBucket album I can link to due to it being blocked in the office... It is of the paint detailing done by EliteAuto: http://s575.photobucket.com/albums/ss19 ... rotection/

Jayyyyyysus there is some spec there ������

I'd take the bonnet and radiator, rear brace and underside beams 100%

ill take the fmic! does it come with piping? put my name on it if your breaking!

Pic of wheels, gear knob and seats please

would you sell the 8 pot front brake setup separate ??

Twin hks turbos
Top secret manifold
Greddy oil cooler
Pm coming your way!!

Quote:

---

Originally Posted by ciaran.canney

Jayyyyyysus there is some spec there ������

---

Yep- I've built her from the ground up over the last couple of years... So sad to have to even consider parting her out now.

Quote:

---

Originally Posted by hughesad

I'd take the bonnet and radiator, rear brace and underside beams 100%

---

I still don't have the car back from Paul Wray, once it's returned after all this work I'll get some pics and send them on.

Quote:

---

Originally Posted by PeterT

ill take the fmic! does it come with piping? put my name on it if your breaking!

---

I erplied to your PM ;)

Quote:

---

Originally Posted by mossyhennebry

Pic of wheels, gear knob and seats please

---

Will post pics when I get the car back :)

Quote:

---

Originally Posted by git

would you sell the 8 pot front brake setup separate ??

---

Yes, I'll look into pricing shortly..


Also- the brake kit was literally used ONCE! The same goes for the clutch and loads of other bits.
I just had her finished the night before a track day last november (2012), shortly into the day my engine blew :(
Since then I sourced the new engine in Japan, got multiple other bits and pieces sorted and have been building it up since then.

Apologies for the delayed response(s) am extremely busy in the office lately.

Great, will take a look and reply when I can :)

Iv lost your number due to phone change pm me it interest in the whole ca. missed out on one today! Can never have enough gtrs!

Be shame to see something like that broke

Dibs on front bumper if for sale!!! Pm me
And n1 lip!!

wel lad ill take the wings and indicators off ya if ur gonna break her :) pm me if ya are

you can return my calls and messages too why your at it

Pmd for about few parts

send me pics of the gearknob - very interested

pm me the price on the car might be intrested

It would be a serious shame to break her but the unfortunate thing is that breaking it will get me X amount where as a direct sale, especially here, would be much lower.

I've 35k+ in her over the last few years, while I NEVER expect even close to that back, or even half of it I do know that she is worth a few quid...
The lowest ballpark figure I could entertain is €10k.

The walbro a internal or external pump and is it old pm me

Will take gearbox if you break pm sent, thanks.

Waiting on pm back about N1 lip and front bumper :)

Keep yer eyes off it lads !! ;)

Did u buy it gem?

Such a shame

Jesus Richie hope you don't have to break it

Pm sent

Whats the outcome here?

I picked it up last Sunday ;)

lol some yolks the roundwood hillbillys

Quote:

---

Originally Posted by Stevo

lol some yolks the roundwood hillbillys

---

Sure will be handy yoke if we get a bit of snow up here ..