r32 road car

decided i wanted another r32 for the road the 530d is far to comfy and economical for daily use!! :shocked:

so was looking for a while and decided on this it looks terrible here in the pics but its not to bad it needs an engine box and few bits and a good tidy up!

has an ok enough spec to start with:

gtr front bumper
gtr wings
gtr grill
gtr indicators
genuine Dspeed frp gtr vented bonnet
gtr fmic with custom pipeing
exeddy paddle clutch
hks down pipe
decat
kakimoto cat back
gtr fuel pump
cusco front tension rods
bilstein coilovers all round
s13 none hicas rear subframe
locking collers
gtr steering wheel
3 blitz gauges
drilled discs
brand new ebc pads
braided brake lines front and rear
brand new driftwank camber arms
all hicas shite removed


plans are to get an engine and box in asap, get it up and running nistune it map it and maybe even nct it!

then a set of white 17x9 or 9.5 grid drifts all round 4x4 ride height and cut off the gay narrow gtst quarter panels and properly fit a set of GTR quarters that are here on a crashed gtr we broke, nismo gtr side skirts, gtr spoiler n1 lips front and rear full respray white gtr seats if i can find a decent set for ok money, in the end i want it to be and exact replica of our 1994 V-spec II r32 GTR that should be done and back on the road very soon aswel!

It should look just like this when finished!!
http://i581.photobucket.com/albums/s...s13/r32gtr.jpg


it already looks better than the gtr!!!

http://i581.photobucket.com/albums/s...ps73cc7c39.jpg

http://i581.photobucket.com/albums/s...ps32d8882f.jpg

The rear spolier was falling off with rust on the boot lid!!

http://i581.photobucket.com/albums/s...ps8b22e9c6.jpg

few interior bits were damaged or missing so replaced what ever it needed, now 100% complete and spotless

http://i581.photobucket.com/albums/s...ps144714e1.jpg

http://i581.photobucket.com/albums/s...ps548f8f72.jpg

http://i581.photobucket.com/albums/s...psb4c35344.jpg

http://i581.photobucket.com/albums/s...ps8781791b.jpg

all the boot carpets were missing so had a full imaculate set here from another car we broke awhile back!
(I AM MISSING THE SMALL JACK PANNEL ON PASSO SIDE IF ANYONE HAS ONE LET ME NO)

http://i581.photobucket.com/albums/s...ps51c51dcc.jpg

http://i581.photobucket.com/albums/s...pse3cd1296.jpg

http://i581.photobucket.com/albums/s...ps86f5ac55.jpg


iv already fitted a rust free white bootlid i had here 5 peice oem skyline mat set, removed load of crap jappo wireing and gay turbo timer

Where do you find them :) Looking forward to seeing the result, best of luck :)

space.......haha ah iv been looking a while for one, didnt think he would sell it but i got him on a good day!

Is that the one Dave has? Will look cool when done gem

Good to see a project that will be finished. Lots of potential

I was looking at the first pic in the phone wondering wtf you were saying it looks bad in the pics then I saw the rest haha. Cool project, world needs more r32s!!

NICE!!! More road going 32's needed!!! and any 32 with a bubble free dash should be minded!

super hard to get nismo skirts bought! should be here the end if the week!

http://i611.photobucket.com/albums/t...o/6af596f1.jpg

r33gtr drivers seat got

http://i581.photobucket.com/albums/s...psf2d1aaf1.jpg

had a few small problems with the engine i bought for the the car so there is a delay waiting on parts for it so ill just go ahead and do the bodywork first

this is goin ta be very very sweet .. what engine ya goin using ?? gtr ??

daves yard probably looks bear as fuck now! :P make it awesome! R32LIFE <3

almost a shame to be cutting these quater pannels off i removed the type m rear spats and skirts and only found one little bubble of rust on the passo side rear pocket

passo rear pocket
http://i581.photobucket.com/albums/s...pse886e294.jpg

passo sill
http://i581.photobucket.com/albums/s...ps79a71d5f.jpg

drivers rear pocket
http://i581.photobucket.com/albums/s...ps6f0618ba.jpg

so now we see how clean and rust free the shell is its time to CUT IT UP!!!!

http://i581.photobucket.com/albums/s...ps42cb07c7.jpg

http://i581.photobucket.com/albums/s...ps61b64734.jpg

http://i581.photobucket.com/albums/s...ps9c051b95.jpg


tiny tiny bit of surface starting on the inner arch would hve been few years before broke through the outer quterpannel :

http://i581.photobucket.com/albums/s...psb500125f.jpg

surfce on the inside of the rear pocket:

http://i581.photobucket.com/albums/s...psc3ff4b39.jpg


in comes the crashed doner 32gtr unfortunitly this immaculate gtr had a retard of an owner and hit a wall damaging the front end very badly, it didnt make sence to repair the shell so we broke it thankfully the shell is 100% rust free

http://i581.photobucket.com/albums/s...ps5bd36c1d.jpg

http://i581.photobucket.com/albums/s...psaf35dae7.jpg

quarter pannel off the gtr,

http://i581.photobucket.com/albums/s...pse577c503.jpg

the inner main C pillar support:

http://i581.photobucket.com/albums/s...psfc3ac24a.jpg

removed to allow the inner arch to be removed
http://i581.photobucket.com/albums/s...ps6a47d63b.jpg

this is the gtr pannel sitting over the gtst and is the same pannel
http://i581.photobucket.com/albums/s...psb54e473b.jpg

next is the lower inner sill

GTST
http://i581.photobucket.com/albums/s...ps4cf8350f.jpg

GTR
http://i581.photobucket.com/albums/s...ps443cd2b2.jpg

inner arch remover from the GTR
http://i581.photobucket.com/albums/s...ps8a8f4102.jpg

inner arch removed from the GTST
http://i581.photobucket.com/albums/s...ps8d9ef18e.jpg

and the GTR quater pannel sitting in place on the GTST
http://i581.photobucket.com/albums/s...ps1d8e95f2.jpg

http://i581.photobucket.com/albums/s...psfc866c82.jpg

GTR side

http://i581.photobucket.com/albums/s...pscd38b0eb.jpg

GTST side

http://i581.photobucket.com/albums/s...ps0c485195.jpg

GTR side

http://i581.photobucket.com/albums/s...psaa96ec11.jpg

GTST side

http://i581.photobucket.com/albums/s...ps6f1ef685.jpg

jaysus! wasnt expecting to see it that clean after the boot lid pics etc!

good shtuf. Gis it.

nice work gem

Quote:

---

Originally Posted by PeterT

jaysus! wasnt expecting to see it that clean after the boot lid pics etc!

good shtuf. Gis it.

---

ye its spotless underneith paint wasnt even that bad when i washed it! could have gotton away with a buff but feck it cut it up!!

the spoiler on the rusty bootlid wasnt even a skyline one someone had badly drilled holes in the under skin of the boot and bolted it on badly thats why it rusted so bad,

ya can buy it when i bored with it!! haha 5-6 weeks on the road id say!!

Sills and pockets were mint so cut it up hahaha, love it :D

Gonna be a sweet car, this the one you picked up at docks years ago?

Thats fair work very tidy will look awesome no shortcuts going on here

cant wait to see this finished very tasty work gem

Gem your mental!! I love it!! Ha ha ha

Ha now thats how u change quarters, fair play man

Good work lad, looking forward to it being finished.. Keep up the gud work 👍