sr20 parts for sale

Printable View

19-06-12, 17:01
mbarry

sr20 parts for sale

s14 sr20det vvt complete engine minus manifold and turbo 500
s14 box 150 euro
s14 fiberglass boot new 150
qsp recliner seats never used 480
ca18det engine headgasket and timing belt done head skimmed new valves 250 euro
ca18det gearbox 100 euro
horsham developments stage 2 ecu for ca18det 100 euro

contact colin on 0857832204
24-06-12, 16:33
colin sx

sr20det vvt found a standard manifold, comes with complete engine worth of parts, head, block, everything ......350e no use for it or will swap 4 pair of rota grid drifts 18x9.5 or 10s 4 or 5 stud or pair of works professors sp1s or ssr viennas or 180sx kit

ca.....sold
2x gearboxes...sold
25-06-12, 13:19
colin sx

bump.......
25-06-12, 23:08
srbrian

what kind of mileage on the SR20 engine?
26-06-12, 01:10
K series steve

is there a turbo with the ca18det?have you any wiring loom?
26-06-12, 11:40
NPJC

Whats the bottom end like on the ca18? has there bin work done on it?
27-06-12, 21:08
colin sx

sr has bout 60k ish not sure bought it off mike dean, came out of a road car.
ca was fine when i took it out, putting a 2jz in instead, wiring harness is there for it
27-06-12, 21:11
colin sx

no turbo with it, standard manifold is there for it
no work done to bottom end
27-06-12, 21:25
kouki_kid

I did headgasket on the CA bout 2 years ago
and it's done very little milage since it's a good healthy
engine!!
29-06-12, 20:21
colin sx

Bump....
01-07-12, 21:37
colin sx

bump...
02-07-12, 22:19
colin sx

will swap sr20 engine or ca engine and box for 180sx fiber glass 50mm quarters and 30mm wings, must be in good condition, or body kit,
03-07-12, 17:57
colin sx

will also swap engine for bolt in roll cage for 180sx
04-07-12, 22:35
colin sx

bump....
04-07-12, 22:44
thehatchet

do you still have the sr20 engine?
04-07-12, 22:49
colin sx

i do indeed
05-07-12, 10:06
NPJC

interested in the ca18 engine with chip contact me 0879173624
05-07-12, 10:32
colin sx

engine is sold but still have the chip
05-07-12, 19:33
NPJC

so if the head was skimmed did it over heat badly
05-07-12, 20:42
colin sx

no, the fella who owned it before me did somethin to it when he was servicing it, ill get the buddy der to post up what happened, somethin to do with valves
06-07-12, 09:58
kouki_kid

The engine didn't over heat at all there was a faulty plug fitted to it
the tip broke off and bent an inlet valve on no 2 cylinder good valves
Were sourced and properly lapped in with new valve stem oil seals, and
New head bolts and a new gasket where fitted hope
this clears up the matter!!
07-07-12, 16:29
colin sx

bump...
08-07-12, 16:18
colin sx

bumppppppp
09-07-12, 10:14
colin sx

bump ...
11-07-12, 12:11
colin sx

bump...
12-07-12, 11:09
colin sx

bump...
15-07-12, 10:54
colin sx

bump...
15-07-12, 12:00
patt

is the sr20 still there mate pm me best price on it
16-07-12, 15:24
colin sx

bump,,,.
17-07-12, 09:49
colin sx

bump...
18-07-12, 09:18
colin sx

bump...
18-07-12, 17:35
colin sx

bump...
19-07-12, 16:30
colin sx

bump..
20-07-12, 12:10
colin sx

bump...
21-07-12, 16:31
colin sx

any1 for cheap sr20
21-07-12, 17:09
thehatchet

you got PM :)