My blue s14a 200sx

Printable View

28-04-12, 02:01
flynhy

My blue s14a 200sx

Hi guys, I just wanted to tut a thread about my lovely s14a. I have it for a year now and i just pic it up from TDP yesterday. Robbie did great job with her.
It`s a road car and when i bought it a year ago it had only body kit, intercooler and blow off. There is almost nothing original left in the engine bay.

Spec at the moment:
Freshly rebuild sr20det engine
Tomei 256 cams
TD05 18g turbo
Nismo 550cc injectors
Z32
Walbro 255 fuel pump
FPR
Intercooler
Blow off
Alloy rad with electric fan
Hydro
Guizzmo boost controller
Apexi PFC with hand commander
4 branch manifold (heat warped)
3" stainless steel elbow, down pipe, de-cat, cat back
G Master coil overs all around
18x8.5 and 18x9.5 Ultralight Nurburgring wheels
Bride recliners driver and passenger side
Momo deep dish steering wheel with quick release
Battery relocated in the boot
Front and rear strut brace
Exedy Stage 2 3 puck clutch

There could be something else i forget but I can`t think of at the moment.

Plans for the future are:
Steel head gasket

Maybe a extra lock
And a few other bits and bobs

The car is currently running 338 wheel bhp and 380 fly wheel bhp with 379 lbft of torque at 1.2 bar pressure. Very happy with the result
28-04-12, 10:32
flynhy

There are few pics
http://i1078.photobucket.com/albums/.../WP_000071.jpg
http://i1078.photobucket.com/albums/.../WP_000070.jpg
http://i1078.photobucket.com/albums/.../WP_000069.jpg
http://i1078.photobucket.com/albums/.../WP_000068.jpg
http://i1078.photobucket.com/albums/.../WP_000066.jpg
http://i1078.photobucket.com/albums/.../WP_000063.jpg
http://i1078.photobucket.com/albums/.../WP_000060.jpg
28-04-12, 10:33
flynhy

And the Dynapack results
http://i1078.photobucket.com/albums/...lyWheelbhp.jpg
http://i1078.photobucket.com/albums/...heelbhp001.jpg
http://i1078.photobucket.com/albums/...y/Boost003.jpg
28-04-12, 12:23
seanie R.33

lovely car,what blue is that?imprsesive figures too!good luck with her!
28-04-12, 13:16
slithertooth

Well done tod , really has come a long way since you got it , How did robbie find that turbo? Is it still the kingunwa unit or is it a greddy
28-04-12, 17:12
SPierce

Look like a Mitsubishi blue ??
28-04-12, 18:43
derek89

Very nice car man. Lovely colour and some figures to go wit it
28-04-12, 20:41
pepsterx

Quote:

Originally Posted by slithertooth

Well done tod , really has come a long way since you got it , How did robbie find that turbo? Is it still the kingunwa unit or is it a greddy

Still the same turbo dude.
28-04-12, 20:45
pepsterx

Go and have a bit of fun in it now and stop spending money like they are going out of fashion !!! She will eventually kill you and then kill me ;) Is it still laggy ?

P.S. Come visit so i can show you how to drive it ha, i've nothing quick at the mo :(
28-04-12, 22:54
flynhy

Quote:

Originally Posted by seanie R.33

lovely car,what blue is that?imprsesive figures too!good luck with her!

Thanks lads It's Isuzo blue.
29-04-12, 00:53
flynhy

Quote:

Originally Posted by slithertooth

Well done tod , really has come a long way since you got it , How did robbie find that turbo? Is it still the kingunwa unit or is it a greddy

Yea it's still the same turbo. He said that he is surprised from the power he extracted of the car. He didn't expected it. For the turbo.. . It can not hold the boost very well. I'll put up the graph. He said that it's normal for these turbos.
Next I have to put steal head gasket and put the boost a bit more up...
29-04-12, 02:41
flynhy

Quote:

Originally Posted by pepsterx

Go and have a bit of fun in it now and stop spending money like they are going out of fashion !!! She will eventually kill you and then kill me ;) Is it still laggy ?

P.S. Come visit so i can show you how to drive it ha, i've nothing quick at the mo :(

I'm going to enjoy her but if i bring it to the track i`ll wreck it. You know me well. I`ll come over to visit you soon and you can say for yourself is it laggy. I emailed you all the graphs so you can see the results.
29-04-12, 08:58
slithertooth

Quote:

Originally Posted by flynhy

Yea it's still the same turbo. He said that he is surprised from the power he extracted of the car. He didn't expected it. For the turbo.. . It can not hold the boost very well. I'll put up the graph. He said that it's normal for these turbos.
Next I have to put steal head gasket and put the boost a bit more up...

annot hold boost?? is that down to the actuator? Did petko not have the same trouble? would it hold better on a different actuator?
29-04-12, 12:29
flynhy

Quote:

Originally Posted by slithertooth

annot hold boost?? is that down to the actuator? Did petko not have the same trouble? would it hold better on a different actuator?

I don`t know to be honest. I didn`t ask him. I think petko did something with the actuator, but not sure.
29-04-12, 12:50
pepsterx

Quote:

Originally Posted by flynhy

I don`t know to be honest. I didn`t ask him. I think petko did something with the actuator, but not sure.

I didn't, i was getting boost creep due to waste gate not opening fully, it was suspected that waste gate hole was too small but when i took the turbo out to widen it, turned out the housing was machined in such way that waste gate was hitting it there for not opening fully, as far as not being able to hold boost there was no issue there, though i was running 1 bar boost not 1.2 !!
29-04-12, 22:37
LauraD

thats is one sexy s14 , love it !
29-04-12, 22:44
galway joey

its gourgeous mate, and nice power to, very clean....
29-04-12, 23:12
flynhy

It`s a 200sx but there is little to non rust on it. It really is very clean car...
29-04-12, 23:51
Stevo

This on georges street most nights?
30-04-12, 09:42
flynhy

Quote:

Originally Posted by Stevo

This on georges street most nights?

Most nights no, but many of them :D:D I`m working there.
06-05-12, 21:11
flynhy

Where can i gen nice performance clutch?
05-11-12, 16:02
flynhy

Now there are a few new updates on the car since last time i updated the specs.

First i want to say thanks to Petko (pepsterx) for doing the hole work on the car and to Jay form DI Motorsport for fitting the hydro and the clutch. Great job lads.

Petko did the hole engine transplant and any other job i`ve had on the car.
He putted a new tick Alloy Rad just a moth ago.

Now there is the hydro fitted by Jay
http://i1078.photobucket.com/albums/...51463008_o.jpg
http://i1078.photobucket.com/albums/...29288918_n.jpg
http://i1078.photobucket.com/albums/...37111814_o.jpg
http://i1078.photobucket.com/albums/...85186388_o.jpg
http://i1078.photobucket.com/albums/...13543812_n.jpg
http://i1078.photobucket.com/albums/...30666695_o.jpg

And fitting the Exedy stage 2 clutch done by Jay as well
http://i1078.photobucket.com/albums/...36829172_o.jpg
http://i1078.photobucket.com/albums/...87359439_o.jpg
http://i1078.photobucket.com/albums/...75374576_o.jpg
05-11-12, 16:32
ali-d1936

Seen that on face book, one question tho, can you not undo the two bolts on the cylinder and rotate it 180 so the lines are comming out the bottom, not comming up in the air like that? Maybe they cant be turned around but i think it would be alot neeter, looks good tho.
05-11-12, 16:36
flynhy

Quote:

Originally Posted by ali-d1936

Seen that on face book, one question tho, can you not undo the two bolts on the cylinder and rotate it 180 so the lines are comming out the bottom, not comming up in the air like that? Maybe they cant be turned around but i think it would be alot neeter, looks good tho.

Lol good question. Never tough of that. I`ll check with Jay.
05-11-12, 17:40
Mayo S13

ya good idea for the lines faced down, where did you get the bracket for the hydro looks neat!?
05-11-12, 18:32
richy180

sweet yoke, ,looks mint!
05-11-12, 19:38
flynhy

Quote:

Originally Posted by Mayo S13

ya good idea for the lines faced down, where did you get the bracket for the hydro looks neat!?

Jay did it himself. Looks good doesn't it?
05-11-12, 23:36
Mayo S13

ya looks very well, must get the mig welder out :) cool car btw nice color, keep it up!
06-11-12, 00:55
broad.sideways

lovely car man credits to ya. lovely colour
06-11-12, 08:20
flynhy

I don`t think it`ll be nice for too long. I`m starting to do trackdays with it.
06-11-12, 14:51
flynhy

Quote:

Originally Posted by ali-d1936

Seen that on face book, one question tho, can you not undo the two bolts on the cylinder and rotate it 180 so the lines are comming out the bottom, not comming up in the air like that? Maybe they cant be turned around but i think it would be alot neeter, looks good tho.

On most types of cylinders it wont work upside down.. air gets trapped and cant escape so you cant bleed it properly and it wont lock up!
07-11-12, 23:34
cam mad

lovely car man..love the colour
08-11-12, 12:35
flynhy

Quote:

Originally Posted by cam mad

lovely car man..love the colour

Thanks.
There are a few more thinks i want to do with it. I`ll be looking for bolt on cage so if anyone has one... Send me a PM.
08-11-12, 16:34
D1SL

Lovely car bro.. love the wheels well wear with it
08-11-12, 16:47
Gavd86

Nice figures not too many road going ones at that power
08-11-12, 16:53
WayneR33

Lovely car man, have the same wheels on my 33 in black would love to spray them that colour
09-11-12, 15:40
flynhy

Quote:

Originally Posted by Gavd86

Nice figures not too many road going ones at that power

Yea i know. The car is an alcoholic tho....

Quote:

Originally Posted by WayneR33

Lovely car man, have the same wheels on my 33 in black would love to spray them that colour

Thanks, i like them too but i`ll love ot have a set of ROTAs to see how they`ll like like on it.
08-05-14, 17:06
flynhy

Some more extras in and updates to come soon...