Printable View
i know i had a thread up on this before but im desperately looking for a good panel beater in the cork/mallow area
the last lad is after leaving for australia so need to get the car sorted before the 25th
any suggestions with the exception of gem with a lump hammer :p
Eoin o'sullivan is good.He's Not Far from Mallow.........Donoughmore if you know it.Ill try and get you a number for him...Quote:
Originally Posted by jeff nelson sileighty
sound ya do if you canQuote:
Originally Posted by doriftojoe
Dan hegerty-s work looks tasty
afaik hes in fas so doubt hed have a chance???Quote:
Originally Posted by damo86
surely some of ye know of a handy panel beater?
What about the Famous JH? He's not a million miles away.
Jeffffffffffffffff
What about 'Mallow Crash Repair Centre' , dont have a number now but I hear alot of the lads speak highly of this place!!
Didnt know john was at it?pm his number if you have itQuote:
Originally Posted by keith-n
Hes actually a friend of the family but id never get work done by him his prices are fucking insaneQuote:
Originally Posted by Vtec Queen
Straightened the back of mine out ,after punchistown :cool:Quote:
Originally Posted by keith-n
James will you pm me johns number ill see can he help me out?Quote:
Originally Posted by Cooldrft
but sure if he's a friend of the family.... :DQuote:
Originally Posted by jeff nelson sileighty
im sure youre friends with some familys but that doesnt mean your any cheaper for them susan :DQuote:
Originally Posted by Vtec Queen
i joke i joke hes still too expensive....he quoted one of the lads 3grand to respray a bora :eek: :eek: :eek:
throw up i pic of it till we see da damage?
Did you ring me today Jeff laaaaaaaad? Missed a call from a Caaaaaaaaark landline.... Hate ringin landlines back, feel like a spare prick :o
ill chuck one up tommorrow tis a nice ole tap :pQuote:
Originally Posted by Drift_sil80
naarp wasnt me dont have your number sexy :wink: :pQuote:
Originally Posted by Famous jh
Quote:
Originally Posted by jeff nelson sileighty
But now you can sort it via pm, keep the work/money in the "family" ;)
im in mitchelstown lad , what you need done any pictures of it
i have pics on my phone ill have a search for the usb cable tomorrow so i can upload themQuote:
Originally Posted by conrod
mitchelstown would be very handy
how about martin o meara??
I was actually on to him on friday he said ring him back today and hell let me know so just waiting to find outQuote:
Originally Posted by Drift_sil80
right ive been trying to get through to martin all day and no answe so lads im badly in need of getting this sortedQuote:
Originally Posted by jeff nelson sileighty
my phones acting the cunt and wont transfer the pictures to the laptop but basically the quater panel is pushed in about 1 to 2 inches where the light should be....it wont take a lot to get it right but you would want to know what your at with the filler :p so if anybody thinks they can help me out please let me know
ah now, u surely have a hammer :pQuote:
Originally Posted by jeff nelson sileighty
Father Ted There's A Dent In The Car - YouTubeQuote:
Originally Posted by Diesel-Dick
briliant! :DQuote:
Originally Posted by Cooldrft
now THAT is me :D :P haha yera i dont have a decent lump hammer :( seriously need to investQuote:
Originally Posted by Cooldrft
Big hammer, cable ties + duct tape = sorted :cool:
Get it fixed properly after wgh :wink:
see ive thought about leaving it till after but in fairness id be hard pressed to find my way into a wall up there :D:pQuote:
Originally Posted by Cooldrft
There will be twinning ,there could be paint swapped :DQuote:
Originally Posted by jeff nelson sileighty
oh yeeees buuut any paint swapped would be on the front wings and the over fender if you get meQuote:
Originally Posted by Cooldrft
If u want iv a lad in rathduff very good, fast and reasonable.. Nd he's very good wit dat kind of stuff
Have seen this fellas work and it ain't so bad at all :pQuote:
Originally Posted by conrod
Vaughney's fella would make a very good job of it too... shur feck it, The Bruno's S14 is giving him plenty of practice with this sort of thing, the nutcase! :D
I'd just get it sorted after WGH though as 3 or 4 days is putting anybody under abit of pressure to do a tidy job at a reasonable price.
There will be plenty of dodgy looking yokes that appear to be held together with hopes and dreams anyway... the bus I'm using included! :rolleyes:
Haha ya I have respect for the lads who come along with Ropey looking yokes cause I'm just NOT able do that haha I'm very bad that way the car has to be washed and waxed every time she goes out hahaQuote:
Originally Posted by DaveM-sport
The lad that did the Mark II for me is very good imho. Competitive prices and he's near you too, between fermoy and mitchelstown. Here's a link to his page if you wanna p.m him or i can send on his number if ya like.
http://www.driftireland.com/forum/member.php?u=1870
my dad is handi out wit d hammer lad im only in killarni
well lads thanks very much to all of ye for the info and advice but i decided fuck it and dragged paul stryker (drift sil80) down to help me work on it tonight and we only left it a half hour ago and both have to be up early tomorrow....thanks bud i owe ya big time :D....so in short it looks like i have this sorted thanks lads i appreciate the help