Well lads as above im looking for cams and pulleys to go with a 2871r setup??
Any good second hand pair around or where could i buy new ones??
And at what cost roughly??
Printable View
Well lads as above im looking for cams and pulleys to go with a 2871r setup??
Any good second hand pair around or where could i buy new ones??
And at what cost roughly??
A set of red top cams and Tdp will machine ur standered cam pulleys to be ajustable.... Will be spot on....!Quote:
Originally Posted by darren C
would they be much to gain from it??
pm sent
crower were doing a deal a few months back on cams.
i got stage 2 cams, springs and titanum retainers for 590 or something like that.
who sells these??Quote:
Originally Posted by drift student
Is it for a drift car?
got them through rm performance,Quote:
Originally Posted by darren C
best talk to a mapper with your spec to get advice on what would be better.
have 272 cams here €200 ono.
yes for drift car im building..Quote:
Originally Posted by Stonie
ill be running a non vvt black top 2871r turbo with .64 ex, housing
550cc injectors z32, and all the usuall extras
any tips welcome....
brian crower 256 cams and springs lad then go to richard bradly motorsport
where in this country can they be got taffy ??Quote:
Originally Posted by Taffy
phone bradley he,ll sort you out.
where abouts is he? any of ye have his numberQuote:
Originally Posted by Seamie tc
I'm nearly sure Mick in Barrys m sport has sr
Crower cams in stock
00447931583981 there you go he will tell you the best set up sound guy to deal widQuote:
Originally Posted by darren C
have stage 2 crower 264 deg for 350 euro
springs not 2 expensive either
do you need the pullies then aswel r will standard ones go on them??Quote:
Originally Posted by mbarry
standard ones will work, but a balls to set.
bump on this lads..
Are 264 digree out of the questian for a 2871r setup on an sr20 ??
also will be going with 740cc injectors insted of 550s
No need for 740s atall...! Serious overkill...! They reckon 256's are the higest to go...!
iv been told 550s would be fairly close to maxed out at 400hp.. would they be right??Quote:
Originally Posted by Robbie Daly Ps13
sorted thanks to alan180sx sound lad :)