-
My 200SX Build!
Hey all i got this 200sx s13 92" from Sweden that was 100% original from the beginning thats quite hard to come bye=).This is my car from start to finish "type" well enjoy.
Info:
DOHC 16V 1.8L CA18DET Single Turbo
Displacement 1809cc
Max Power (169 hp) 6400 rpm
Max Torque 225 Nm 5200 rpm
5 Speed MT
2,5 Cat-back
Heatisolated Downpipe
Grinded crankshaft Bigger bearings
TRUST / GREDDY Type RZ blow off valve
HKS Super Mega Flow "reloaded"
HKS 3" Frontpipe/Decatt
Thermostatic Oilcooler "28Row "Teflonhoses"
Sachs / Aftermarket Clutch
Bigger AFM
Skyline Spreaders 440cc
Tuned ECU Stage II
Chassi:
MacPherson Front Strut
Solid Axle
Limited Slip Differential
Cusco-Sport ZERO-3 Coilovers "Pillowball Upper Mount"
Tires, Rims and Brakes:
215/45/17 Superspeed Rims
Duro Performa HR1 Tires
Interior:
*Elektronic*
HKS Turbotimer Type/0
*Interior*
Nismo Seat Belt Lock Cover "Leather"
Räzo Race Pedals
Nismo Metal Sticker
Nismo S-Tune 5MT Leather Shift Knob
Exterior:
Tinted Windows
Soshinoya Wakataba Leafs
Rear wiper and motor removed
Clear Projector Headlight
Bi Xenon 4200K
Xenon LED
Carbon Pillars
Car Audio:
JVC KD-G731 Pioneer CDX-M40 2* Pioneer 20Gb
Ground Zero 6.9Front speakers
Futureplans for me:
D-Max roofwing
Headlight Carbon Air Duckt
Yashio Gear Boot
Xenon 8000K
Carbon Innerdoor
Carbon Interior
Engine renovate did change bearings and grinded the crankshaft:
http://desmond.imageshack.us/Himg801...jpg&res=medium
placement of my overzized oilcooler
http://desmond.imageshack.us/Himg185...jpg&res=mediumhttp://desmond.imageshack.us/Himg717...jpg&res=medium
Mr big cooler
http://desmond.imageshack.us/Himg832...jpg&res=medium
Placement brackets for oilcooler http://desmond.imageshack.us/Himg826...jpg&res=medium
Reasembling the enginge now whit electric fan biggest i found :Phttp://desmond.imageshack.us/Himg707...jpg&res=medium
Soon its alive...http://desmond.imageshack.us/Himg90/...jpg&res=medium
Its alive!http://desmond.imageshack.us/Himg822...jpg&res=medium
-
Got my front/downpipe but it did not fit as i expected you se the gap? :P im now only driving whit the frontpipe and original down...
http://desmond.imageshack.us/Himg860...jpg&res=mediumhttp://desmond.imageshack.us/Himg857...jpg&res=medium
-
-
-
-
-
-
Got the coils mounted now need to make it higher like 3cm back 2cm front so i can drive almost anywhere :D
http://www1.garaget.org/archive/48/4...09-2420279.jpghttp://www1.garaget.org/archive/48/4...09-2420285.jpg
-
-
love how clean that is
great work man
-
that one clean car mate, fair play toya :afro::afro::afro:
why wouldnt the decat match up???
-
Best of luck with man, whena the SR going in?
-
no the decat did match i did just take a quick photo of it... si_berry i have no idea maybe later if i even keep the car =)
-
-
5 Attachment(s)
spraying on the new paint..
-
carbon door panels and interior in future works.thats nice but think that wing mount intercooler is very restrictive. any upgrade planned?
-
no not in a long while cause i crashed in a moose im alright but shaken up.the car has a nasty damage hope the insurance company will repair it for me. :(
-
shit out of luck man! looks so clean in the pics for a 200sx! much chassis damage?
-
-
Holly shit man!!! I did the same but donkey instead ofn a moose :)
-
Shit man thats nasty. Hope insurance sorts it out for ya
-
yes Keith i hope it too.aha pepsterx a donkey hehe hope you got not hurt.
