Lots of shitze needed, you might have them in the back of your shed :D

Need a few things there lads, need to get out in my 32 again asap!

*bride/recaro rail for r32 or sbody

*Updated clutch, no stage one shit, some of you may have noticed i like to rape the car down the straight and my exedy has died :D

*Coil pack mounting bracket, the one that you bolt the coilpacks into that sits in between cam covers.

*intercooler pipe, the nearly 90 degree that goes from the passenger side fmic pipe to the pipe that goes to the turbo, hard to explain!?

Possibly an rb20 gearbox, but I've to investigate to see if there's any oil in the current one :D


If you have any of these gimme a holla thank you please!

may have 20 or 25mm toyota spacers pete leave it with me

Good man lover, lemme know thanks!

Quote:

---

Originally Posted by PeterT

Need a few things there lads, need to get out in my 32 again asap!

Need a bucket seat or recliner of some sort with a rail for an r32, ANYTYING considered

Updated clutch, no stage one shit, some of you may have noticed i like to rape the car down the straight and my exedy has died :D

Coil pack mounting bracket, the one that you bolt the coilpacks into that sits in between cam covers.


5 stud wheel spacers in Toyota fitment. (for my daily)

Possibly an rb20 gearbox, but I've to investigate to see if there's any oil in the current one :D


If you have any of these gimme a holla thank you please!

---

i have the bride out off my cefiro on a skyline bride rail......250 with the rail....Might be to pricey for you for what your useing it for!......

box.....200

clutch i have that twin plate orc one there its practically brand new but the pressure plate is damaged......doubht you will get a clutch as good for the money it will stand you with a new pressure plate!! 250 euro again might be to pricey but the clutch is like 2300 euro new....new plate is 300 euro...and the disk have 1/2 mm wear

bracket for the coil packs i have.....20 squids

Have a bride recliner would u sell the subframe?!

Clutch isn't much use to me unfortunately for what I want sorry! May be back to ya on rail tho! Yeow

Quote:

---

Originally Posted by PeterT

Need a few things there lads, need to get out in my 32 again asap!

Need a bucket seat or recliner of some sort with a rail for an r32, ANYTYING considered

Updated clutch, no stage one shit, some of you may have noticed i like to rape the car down the straight and my exedy has died :D

Coil pack mounting bracket, the one that you bolt the coilpacks into that sits in between cam covers.


5 stud wheel spacers in Toyota fitment. (for my daily)

Possibly an rb20 gearbox, but I've to investigate to see if there's any oil in the current one :D


If you have any of these gimme a holla thank you please!

---

Send damo deane a pm he has a box and a few bits

Quote:

---

Originally Posted by PeterT

Have a bride recliner would u sell the subframe?!

Clutch isn't much use to me unfortunately for what I want sorry! May be back to ya on rail tho! Yeow

---

Nope I won't be selling it separate!

Have coilpack mounting brackets here man.;)

I have a set of standard is200 wheels if your stuck?

eastbear seat on rail for 32.. 100 quid

Quote:

---

Originally Posted by DaveM-sport

I have a set of standard is200 wheels if your stuck?

---

wait, whut?


danny, any pics??

Quote:

---

Originally Posted by PeterT

5 stud wheel spacers in Toyota fitment. (for my daily)

---

Have some of those standard 5 spoke jobbies in the garage that came off an is200. there is tyres on them but are probably in shite and I'm sure there's one or two triangles on them!:rolleyes:

would like to get rid of them anyway though if you want to give anything for them.

thanks, but im not looking for any wheels!? :D

bing bing boom

Joe in custom metal works could make ya the piping

It's only the little rubber one, should have stated that! Ps are u in Vodafone 1c?!

any ur mates handy with steel...make up a frame for seat in 1-2hrs fitted the lot....u be doin wel to get 1 for 40-50 were as if u make 1 it'l cost 10-20...is it track car??if not that idea out the window..iv the coil mounts there if u get stuck..did u have look on e-bay at clutches??always a gud bet lad

Yeah man for my sins
Tis a kip

Yeh I think I might get a rail made up as u have a bride recliner lying there at home! I'd e a little bit weary buying clutches off the bay!

Barnes, me too, over by the window though so it's not too bad :D

Quote:

---

Originally Posted by PeterT

Yeh I think I might get a rail made up as u have a bride recliner lying there at home! I'd e a little bit weary buying clutches off the bay!

Barnes, me too, over by the window though so it's not too bad :D

---

Just buy a clutch brand that you know and your fine!

Need a decent make and I've seem on dw there's like fake new exedys and stuff on eBay!

Quote:

---

Originally Posted by PeterT

Barnes, me too, over by the window though so it's not too bad :D

---

Ah not too bad. Over in o/b yeah?

Yup yup that's me, saw the 14a in the carpark this morning!

Quote:

---

Originally Posted by PeterT

Need a decent make and I've seem on dw there's like fake new exedys and stuff on eBay!

---

lad i wudnt not just look into it cause of that....iv bought splitfires,nismo 740s,spoiler etc loads bike bits....lik u can check the feedbak on the sellers and check their background or even call them....I buy generally near eveytin on the net...make sure their through paypal....otherwise wudnt go near them if they were,nt but generally most of them are wit paypal....
save you a few quid & ud have a brand new clutch at ur door...sure id say most of the clutches for 32 are only accross the pond in eng

Quote:

---

Originally Posted by PeterT

Yup yup that's me, saw the 14a in the carpark this morning!

---

yup.. it takes ages to get it into the carpark downstairs