My red sx...Rb26 build...

Printable View

21-03-11, 22:14
Bradley_Motorworks

My red sx...Rb26 build...

Basically I got bored with my SR20...I pushed it to pretty much its limit on my setup @607hp...
The next logical upgrade was an RB26...:)
I came across an RB block at the rite money so started building it...
Started off with the usual Pistons, rods, H.G..Then added a big set of cams, springs and a very expensive Jun oil pump etc...
http://photos-b.ak.fbcdn.net/hphotos..._4501421_a.jpg

http://photos-h.ak.fbcdn.net/hphotos..._1705617_a.jpg

Few weeks ago I stripped the car to swap engines and decided to freshen up the engine bay in the process...
http://photos-a.ak.fbcdn.net/hphotos..._1225532_a.jpg

Finished building the engine a few weeks ago, added my GT35 and a set of 1100 CC injectors
http://photos-c.ak.fbcdn.net/hphotos...9_476589_a.jpg

Took into the car on Saturday and started assembling it.
http://photos-c.ak.fbcdn.net/hphotos..._1307843_a.jpg

http://photos-d.ak.fbcdn.net/hphotos..._8311044_a.jpg

http://photos-g.ak.fbcdn.net/hphotos..._4679541_a.jpg

http://photos-b.ak.fbcdn.net/hphotos..._2782588_a.jpg

Then decided my wheels needed refreshed
http://photos-e.ak.fbcdn.net/hphotos...73_27805_a.jpg

In the process of doing a full wire in a link G4 ecu loom, moved fuse box inside car so hopefully I wont see any wires this time.
All being well should have car running for the weekend then just map it next week in time for straightlinners in Enniskillen.
More up dates to come :)
21-03-11, 22:17
Bradley_Motorworks

Oh aye
the original engine from this now lives in my drift car with its new 6031 precision turbo :)
http://photos-f.ak.fbcdn.net/hphotos...4_245506_a.jpg

http://photos-b.ak.fbcdn.net/hphotos..._6050530_a.jpg

http://photos-g.ak.fbcdn.net/hphotos..._7364054_a.jpg
21-03-11, 22:34
richy

Sure to be a rapid machine!

You tackling prodrift this year?
21-03-11, 23:02
serious tom

Oil pump, wise move. Ha.
Good to see your pushing yourself for something bigger and better.
This shall be a beast!
Best if luck!
22-03-11, 00:20
B&G Extreme Drifting

Quote:

Originally Posted by Bradley_Motorworks

Basically I got bored with my SR20...I pushed it to pretty much its limit on my setup @607hp...
The next logical upgrade was an RB26...:)
I came across an RB block at the rite money so started building it...
Started off with the usual Pistons, rods, H.G..Then added a big set of cams, springs and a very expensive Jun oil pump etc...
http://photos-b.ak.fbcdn.net/hphotos..._4501421_a.jpg

http://photos-h.ak.fbcdn.net/hphotos..._1705617_a.jpg

Few weeks ago I stripped the car to swap engines and decided to freshen up the engine bay in the process...
http://photos-a.ak.fbcdn.net/hphotos..._1225532_a.jpg

Finished building the engine a few weeks ago, added my GT35 and a set of 1100 CC injectors
http://photos-c.ak.fbcdn.net/hphotos...9_476589_a.jpg

Took into the car on Saturday and started assembling it.
http://photos-c.ak.fbcdn.net/hphotos..._1307843_a.jpg

http://photos-d.ak.fbcdn.net/hphotos..._8311044_a.jpg

http://photos-g.ak.fbcdn.net/hphotos..._4679541_a.jpg

http://photos-b.ak.fbcdn.net/hphotos..._2782588_a.jpg

Then decided my wheels needed refreshed
http://photos-e.ak.fbcdn.net/hphotos...73_27805_a.jpg

In the process of doing a full wire in a link G4 ecu loom, moved fuse box inside car so hopefully I wont see any wires this time.
All being well should have car running for the weekend then just map it next week in time for straightlinners in Enniskillen.
More up dates to come :)

this is a SERIOUS set up and machine,,,no probs to Bradley Motorworks!!! fair play lad, ul b blitzin everytin in reverse :) the drift car is weapon material also...best of luck wit the rest of the build
22-03-11, 08:57
dude

looks well should be a mental car what sort of power you hoping to get
22-03-11, 09:02
pole drift

Could you make the pics bigger??
22-03-11, 18:18
Doofer

Looks a serious set up lad... Fair play.. Best of luck with er
22-03-11, 22:13
Bradley_Motorworks

Should see the high side of 600hp on normal 97 ron...on 115ron prob close to 700 hp
All the big pics can be found on my facebook...
http://www.facebook.com/profile.php?id=100001716819576
22-03-11, 23:35
D1 Chomer

700hp. sounds like is gona cause a painful amount of whiplash from yake off :D
25-03-11, 16:51
franmk

looking good
27-03-11, 20:18
Bradley_Motorworks

Finally after a big push we got the car finished at 1am on at night...Just in time for the Ultimate car show in larne...
5 min base map that morning and off we went...:)
Drives soooooo nice with the 26 in it...Throttle response is crazy...:D
Here a few pics

http://a2.sphotos.ak.fbcdn.net/hphot..._7540018_n.jpg

http://photos-h.ak.fbcdn.net/hphotos..._4568492_a.jpg

http://photos-f.ak.fbcdn.net/hphotos...521_9535_a.jpg

More pics on my facebook...
Car will be going on the rollers next weekend...Ill keep you posted on how it goes:)
27-03-11, 20:29
sr20chi

fair play ta you lad looks very clean and class :)
27-03-11, 22:31
ger15

That shot of the engine bay is pure sex,savage looking fair play
28-03-11, 08:12
dude

nice job looks well
28-03-11, 21:42
robbieb

I want 2 race u in my bm:D
12-05-11, 23:41
Bradley_Motorworks

Pics of new Aviad external oil pump setup...After my Jun oil pump housing cracked!!!
This one should be a tad better...:D

http://profile.ak.fbcdn.net/hprofile..._4715429_q.jpg
http://a7.sphotos.ak.fbcdn.net/hphot...96_60579_n.jpg
http://photos-a.ak.fbcdn.net/hphotos..._7227918_a.jpg
http://photos-d.ak.fbcdn.net/hphotos...0_801165_a.jpg
http://photos-h.ak.fbcdn.net/hphotos..._3889721_a.jpg

Silly pics need to resize them but too tired...Full pics on my facebook...:D
15-05-11, 23:36
Dermot

Cant wait to see this mapped
16-05-11, 23:48
serious tom

I'd make a shrine to that pump, keep those bearings in shape!
Awaiting dyno sheet.
:cool:
21-05-11, 20:38
martydumpvalve

this is some car man all the best must give you a shout bout gettn my yolk set up aswell