Carl's R33 GTS-T

Just copied and pasted an older thread of mine on torque-irl.

Well I tough id get this rolling,

Got my barge back in December 2008 as a swap for my honda accord,

first thing first was to get it checked over, went to tdp with it and he set it up correct as it was running lean (too much air, think thats lean :o)

it made 288@ the fly

two weeks later i checked the oil and to my horror i had a burner! compression test is to be done shortly :(

It looked like this

http://i280.photobucket.com/albums/k...l/R33jpg-3.jpg

or so i tought,

turned out the last owner left the bonnet pins up and when i went to see it the bonnet was wavier than walkers crinkle cut,

and i had some smelly ass tenzo's with no tyres on them so they had to be got rid of aswell,

galla_4 was selling some fairly tasty ultralite battle's so i threw them on

http://i280.photobucket.com/albums/k...5032009172.jpg

then my cf boonet and it now looks like this

http://i280.photobucket.com/albums/k...7032009200.jpg

http://i280.photobucket.com/albums/k...7032009202.jpg

Today im off to pick up a Bride Driver Seat, Recaro Passenger Seat and a Japspeed FMIC

fmic will be fitted tomorow,

Spec so far is

Zeal coilovers
Ultralite battles
Rear upper strut
cusco 2-way diff
cf bonnet
catback (unknown make)

Could someone tell me the front bumper and spoiler make too? :o



Going on modball in it and the graphics are being put on for modified live, compliments of my sponsor [url]www.blvd.ie

----------------------------------------------------------------------



DONT GIVE YOUR CAR TO A FAMILY MEMBER :(


http://i280.photobucket.com/albums/k...9032009208.jpg


its off to the body shop tomorow, will get a good going over and it gives me a chance to have ot minty fresh for modified live, gonna try get a full respray outta him :D



got the fmic fited, pics i have, was dark when we finished


http://i280.photobucket.com/albums/k...9032009211.jpg


http://i280.photobucket.com/albums/k...9032009212.jpg

its off to the body shop tomorow, gonna get loadsa bits sorted and get some proper brackets made up for the fmic

------------------------------------------------------------------------------------------

when i was pickin her up from the bodyshop :)

http://i280.photobucket.com/albums/k...9042009241.jpg

http://i280.photobucket.com/albums/k...9042009242.jpg

http://i280.photobucket.com/albums/k...9042009243.jpg

http://i280.photobucket.com/albums/k...9042009244.jpg

http://i280.photobucket.com/albums/k...9042009245.jpg

http://i280.photobucket.com/albums/k...42009257-1.jpg

--------------------------------------------------------------

fresh paint which unfortunately had to be covered in stickers but had to be done fro modified live, the shop is www.blvd.ie, they sponsoring me and the black evo in one of the pics for modball :D

http://i280.photobucket.com/albums/k...1042009256.jpg

outside the shop

http://i280.photobucket.com/albums/k...1042009257.jpg

modified live 2009 in the rds dublin

http://i280.photobucket.com/albums/k...1042009261.jpg

http://i280.photobucket.com/albums/k...2042009266.jpg

http://i280.photobucket.com/albums/k...2042009270.jpg

http://i280.photobucket.com/albums/k...2042009271.jpg

http://i280.photobucket.com/albums/k...2042009272.jpg

http://i280.photobucket.com/albums/k...e86carl/GC.jpg

-----------------------------------------------------------------------

http://i280.photobucket.com/albums/k...5042009288.jpg


http://i280.photobucket.com/albums/k...5042009287.jpg

that was all from jan - now,

not everything has gone to plan 100%


So here's the spec as of today:



Front Bumper (Unkown Make)
Carbon Bonnet
Lip Spoiler (Again Unkown Make)
Ultralite Battle Wheels (Bronze)


Uprated Rad
Japspeed FMIC
HKS Mushroom Intake

Turbo Elbow
Downpipe
Decat
Catback Exhaust (JASMA "RO" plaque but cannot find make)

Nismo Twin Plate Gmax Clutch
Cusco 2-Way Differential
EBC Redstuff Pads
Polybushed
Rear Strut
Zeal Coilovers


Apexi SAFC
MOMO Race Steering Wheel


Thats all I can think of right now



However,

Im tucking her away for winter and buying a heap of bits and bobs to get her nice and ready for trackdays next summer, gonna rock my serious diesel fez!

Wishlist:

- Nismo Slave Cyliner
- Driftworks Total Hicas Eliminator
- Exhaust Manifold
- Uprated Turbo (not huge but responsive hks gt2540 or similar)
- Bigger Injectors
- FPR
- Oil Cooler
- ECU To Run The Fun
- An NCT ( )
- Reclinable Bucket Seats (recaro's probably)
- New discs and pads but will try get my hands on a full set of brembo's from a GTR
- Lots Of Defi's
- Cage
- New Plugs
- Coilpacks
- Braided Lines
- Takata Harnesses
- A lot of suspension bits from driftworks and then a nice fast road set up from TDP (if they'll have me )
- HID's
- Any Other Niggly bits that are needed to bring it together


How much of a dent I make in that list is very questionable but Im gonna make a good bash at it, got the oul 21'st coming up so tat should help me acquire a few spondoolies to make it viable!


Watch this space

very nice car carl, ya tink ya put pic off modball on it :D:D

ah must do, gotta go hunting on facebook :)

Quote:

---

Originally Posted by CarlCF4

ah must do, gotta go hunting on facebook :)

---

add me when ya there :D:D
all set for 2010

ah dont know if im going yet but i know i defo wont be driving if i do, so if i am going i am all set lol

looks well carl.defo get pics up of the modball:rolleyes::p

love that yolk, the front bumpers deadly on it whatever it is!

havent updated this in a while, well wage cuts and the proceeds of my 21st going on party booze for my 21st meant ive done fook all to the car.





For xmas i got 4 new tyres, Goodyear Eagle f1's



and



a pair of 3g discs and mintex pads for the front





Over time my front bumper got the odd tip and scrape here and there so i decided to get rid of the cable ties for modball and i rehung my bumper, to my dismay when i took it off i found the front mount brackets had come lose and the only thing holding up the FMIC was the bumper and the pipes iin each end! so made up some new brackets and fixed the bonnet catch bracket, cut the bumper and remounted it and now the front is nice and tidyish again (pics tomorow after a wash)



two weeks ago i decided to fix my leaky p/s rear light seal, took out the light, re sealed it popped it back in, jobs a good un



but



water in the boot for so long meant a bit of surface rust



http://i280.photobucket.com/albums/k...arl/photo4.jpg



http://i280.photobucket.com/albums/k...arl/photo3.jpg



http://i280.photobucket.com/albums/k...arl/photo2.jpg



so i sanded it off and ground it down and in a rush to get done before it got dark so i didnt get midway pics!



but here's the afters, im no da vinci with paint but it done the job



http://i280.photobucket.com/albums/k...carl/photo.jpg



http://i280.photobucket.com/albums/k...arl/photo5.jpg



Marty Moore is coming up tomorow to valet the car so ill have some pics of its current condition



I also bought an iPhone so many more pics will come of the tidying up i plan to do over the next week :)

looks the bussss carl, savage car, how the clutch

Quote:

---

Originally Posted by S14a johno

looks the bussss carl, savage car, how the clutch

---

slipping like a claims direct add, i need to order new discs for my nismo twin plate and then ill be mint clutching