Gotech ecu's....!

Printable View

Show 40 post(s) from this thread on one page

20-12-10, 20:14
Robbie Daly Ps13

Gotech ecu's....!

Any of yas know much about these things or is any 1 running 1...! They seem to have very good features for very small money....!

http://gotechshop.ipcoweb.com/products
20-12-10, 20:16
Caseys drifters

Dnt let stone see this ha ha
20-12-10, 20:18
Robbie Daly Ps13

Why dose he not like them...!
20-12-10, 20:19
Caseys drifters

Ring him and ask him their :D
20-12-10, 20:20
Robbie Daly Ps13

Fuck that he'd only give me an earfull...! Il let him see this...!
20-12-10, 20:23
Caseys drifters

Ha ha alri dude how the car comin along
20-12-10, 20:25
1-JAY-Z

Gotech's run airplanes in south africa or somewhere I think so they must be trustworthy to do that job

This 20v runs one with no probs mapped by Martin Treacy
http://i1015.photobucket.com/albums/...et20100010.jpg

Also this ae86 with f20 ran one before the car was broke with no probs either as far as I know.
http://i140.photobucket.com/albums/r...73febb8399.jpg
20-12-10, 20:25
Robbie Daly Ps13

Slowly lad very very slowly...!
20-12-10, 20:29
johnbro

these must be too good to be true otherwise alot more people would opt for thess over nistune or power fc??

I'd go for one if I see enough good reviews
20-12-10, 20:32
Robbie Daly Ps13

Quote:

Originally Posted by johnbro

these must be too good to be true otherwise alot more people would opt for thess over nistune or power fc??

I'd go for one if I see enough good reviews

In fairness lad it wouldn't be hard to fid a better ecu that either of them...! Heard a lot of rally boys run them...!
20-12-10, 20:37
1-JAY-Z

Quote:

Originally Posted by johnbro

these must be too good to be true otherwise alot more people would opt for thess over nistune or power fc??

I'd go for one if I see enough good reviews

Martin Treacy used to push Omex as he's main ecu and as far as I know he changed to these ecu's after falling out with Omex, Thats the story I was told from a reliable source anyway dont know the in's and out's of it.

The 2 cars above run very well with good power.

People follow other people like sheep do, It's like Toyo T1R's years ago, when they came out first if you had a performance car you had to have Toyo on it when there was equally as good tyre sometimes better for the same money,

PFC's use dated technology but seem to be relaible and loads of people can map them, I dont know anything about Nistune.
20-12-10, 20:40
Robbie Daly Ps13

Thats exactly what puts me off pfc there so old and were never updated...! These are only a fraction of the price of motec...!
20-12-10, 20:42
BN Schnider

my brother runs this ecu in his mark 11 rally car...was in the car when he bought it...never had any poblems.
20-12-10, 20:43
S13..KEV

there is a lad called ian byrne.lives between porsperous and clane.he knows every thing you need to know about them.runs a MR2 rallysprint car with it.seems to get great results with the gotec and roco did that black f20 corolla of connor murphy.be a man to ask aswell :D
20-12-10, 22:04
git

Quote:

Originally Posted by S13..KEV

there is a lad called ian byrne.lives between porsperous and clane.he knows every thing you need to know about them.runs a MR2 rallysprint car with it.seems to get great results with the gotec and roco did that black f20 corolla of connor murphy.be a man to ask aswell :D

ian byrne = tdp , im sure robbie will be able to advise you emmmm robbie ha :D
20-12-10, 22:13
yowdy

ian byrne = car torque not tdp
20-12-10, 22:16
git

@ yowdy i ment in terms of getting info. about go tech as tdp maps his car ..........you are also correct ian is called car torque :)
20-12-10, 22:19
bart

daly just buy a motec ya cheap bastard :p:p:p:p
20-12-10, 22:22
markos

what do these prices reflect in euro
20-12-10, 22:26
johnbro

Quote:

Originally Posted by markos

what do these prices reflect in euro

http://coinmill.com/EUR_ZAR.html

550 euro plus shipping for the most expensive one on that link
20-12-10, 22:28
bart

Quote:

Originally Posted by markos

what do these prices reflect in euro

about €400 plus shipping
20-12-10, 22:34
johnbro

Quote:

Originally Posted by AE86-20v

Martin Treacy used to push Omex as he's main ecu and as far as I know he changed to these ecu's after falling out with Omex, Thats the story I was told from a reliable source anyway dont know the in's and out's of it.

The 2 cars above run very well with good power.

People follow other people like sheep do, It's like Toyo T1R's years ago, when they came out first if you had a performance car you had to have Toyo on it when there was equally as good tyre sometimes better for the same money,

PFC's use dated technology but seem to be relaible and loads of people can map them, I dont know anything about Nistune.

Omex are going for similar money as go-tech
seems to be the rally guys sporting omex too
I'm sure there not as good as motec but probably better than nistune or pfc.
20-12-10, 22:42
1-JAY-Z

I've an Omex in mine, It has loads of features most of which I will never use,
20-12-10, 22:45
robbie@tdp.ie

Quote:

Originally Posted by S13..KEV

there is a lad called ian byrne.lives between porsperous and clane.he knows every thing you need to know about them.runs a MR2 rallysprint car with it.seems to get great results with the gotec and roco did that black f20 corolla of connor murphy.be a man to ask aswell :D

Ian Byrne is removing his GoTech and fitting a MoTeC instead. We have reached the end of the road with the ability of the GoTech.

Don't let the spec list fool you. They don't even have simple trim maps for turbo cars .

Robbie
20-12-10, 22:48
Robbie Daly Ps13

New it was too good to be true...! Once i head Saudi Arabia and aeroplanes i knew there was something up...!
20-12-10, 22:49
git

Quote:

Originally Posted by Robbie Daly Ps13

New it was too good to be true...! Once i head Saudi Arabia and aeroplanes i knew there was something up...!

badddum dum tissssshhhhh :D
20-12-10, 22:50
johnbro

Quote:

Originally Posted by robbie@tdp.ie

Ian Byrne is removing his GoTech and fitting a MoTeC instead. We have reached the end of the road with the ability of the GoTech.

Don't let the spec list fool you. They don't even have simple trim maps for turbo cars .

Robbie

what about omex robbie can you map them??
I've an sr20redtop with garrett28 fmic 4" exhaust
budget is as low as possible but i hear bad things about pfc and nistune
motec is what i need ideally but i can't afford it.
20-12-10, 22:55
Stonie

Daily stay off eBay and the Internet you silly boy!!:D
Don't have me slap sence into you!!!!!!
20-12-10, 23:02
Robbie Daly Ps13

Quote:

Originally Posted by Stonie

Daily stay off eBay and the Internet you silly boy!!:D
Don't have me slap sence into you!!!!!!

Id near buy 1 just to annoy you...! lol...! At least id know what to go for if im ever building an aeroplane....! Building an aeroplane....! Mmmmmmmmm...! Theres an idea..... lol
20-12-10, 23:06
robbie@tdp.ie

Quote:

Originally Posted by johnbro

what about omex robbie can you map them??
I've an sr20redtop with garrett28 fmic 4" exhaust
budget is as low as possible but i hear bad things about pfc and nistune
motec is what i need ideally but i can't afford it.

Nearly all the Pro drift cars use Omex which I used to supply. They are good 2x better than a Power FC and Nistune only half as good as an M4 MoTeC as they are not fully sequential and the boost control is open loop.

Robbie
20-12-10, 23:19
Prodrifter86

I've heard of these In rallying alot. But dont
No how good they are.
20-12-10, 23:25
robbie@tdp.ie

Quote:

Originally Posted by Prodrifter86

I've heard of these In rallying alot. But dont
No how good they are.

I think that in 3 years we sold ,fitted & mapped 185 Omex 600 ecus to MK II escorts and Sunbeams Novas and others. Many championships and Rallys have been won with them. They have not updated there SW in 4 years meaning that they are falling behind especially on the turbos. Since we developed the V70 sw with Richard Armitage from GEMS we know how to get the best out of it.

Robbie
20-12-10, 23:28
S13..KEV

Quote:

Originally Posted by robbie@tdp.ie

Ian Byrne is removing his GoTech and fitting a MoTeC instead. We have reached the end of the road with the ability of the GoTech.

Don't let the spec list fool you. They don't even have simple trim maps for turbo cars .

Robbie

I heard that Robbie.thought it was only hear say.good man for the Sr but ca mainly.was very helpful to me over the years.motec all the way.
20-12-10, 23:32
robbie@tdp.ie

Quote:

Originally Posted by S13..KEV

I heard that Robbie.thought it was only hear say.good man for the Sr but ca mainly.was very helpful to me over the years.motec all the way.

Ian is the best type of customer in the world listens to advice and make his cars faster as a result and a gentleman also.

Robbie
20-12-10, 23:35
git

Quote:

Originally Posted by robbie@tdp.ie

Ian is the best type of customer in the world listens to advice and make his cars faster as a result and a gentleman also.

Robbie

and has the best hair do goin :D
20-12-10, 23:35
johnbro

Quote:

Originally Posted by robbie@tdp.ie

Nearly all the Pro drift cars use Omex which I used to supply. They are good 2x better than a Power FC and Nistune only half as good as an M4 MoTeC as they are not fully sequential and the boost control is open loop.

Robbie

what would it cost to map an omex ecu?
how much would ya pay for a second hand omex unit??
20-12-10, 23:36
Stevo

Who sells omex 600's in ireland and what dollars are they??
20-12-10, 23:41
S13..KEV

Quote:

Originally Posted by robbie@tdp.ie

Ian is the best type of customer in the world listens to advice and make his cars faster as a result and a gentleman also.

Robbie

fact and very quiet aswell.......daly might buy a MOTEC with the di deal you referred to the others day on a different thread :-)
20-12-10, 23:42
robbie@tdp.ie

Quote:

Originally Posted by johnbro

what would it cost to map an omex ecu?
how much would ya pay for a second hand omex unit??

Mapping is €450

S/H Ecu probally €400+ very hard to get

TDP.ie SR20 crank sensor Kit €200

Wiring loom € 200

Coil Pack €95
Leads €75

Wiring to the car €80

They are cheaper than a brand new MoTeC M4 but not by allot.

Robbie
20-12-10, 23:44
robbie@tdp.ie

Quote:

Originally Posted by Stevo

Who sells omex 600's in ireland and what dollars are they??

I still sell them but due to some politics that OMEX decided on we dont push them at all.

A new Omex 600 is 620+vat for the ECU

Bare Loom is 150+vat.

Show 40 post(s) from this thread on one page

All times are GMT. The time now is 17:00.