WANTED!! Rocker Arm Stoppers and

AS above im lookin for some Rocker Arm Stoppers

and an uprated fuel pump for my 180

anybody know of any:confused:

Rocker arm stoppers Driftworks lad, Team Recession busters can sort out a pump for ya.

DW for both if Andy or Bart havent got them.

Just about to order these off DW

But they dont have the 180sx listed would be the same as the 200sx??

Yes pending your super 180 is Blacktop

Yeah yours is a non vvt blacktop isnt it Paul??

Doesnt have the bulge in the front left of the rockercover?

try frsports in america.i got greddy ones from them for 70 dollars and theyre real fast with shipping.they have everythin for nissans:D

Sound! ye jay shes blacktop alright
i wouldn know about the bulge tho
il hav a look wen i go down to me garage latter..
wats the bulge mean anyway?

Its just to allow room for the bigger pulley on vvt engines!

Right well went ahead and orderd the feul pump from DW
but it turns out a 200s feul pump dose NOT fit my 180:rolleyes:
So here i am with a 200 pump thats no good to me..
and booked into BC for saturday and no feul pump:mad:
Sooo does anybody have an uprated 180 pump for sale
or of anywere that would have them in stock :confused:
Thanks!

That sounds odd lad, i can't see how the wiring would be any different??:confused:

Quote:

---

Originally Posted by CillianS14a

That sounds odd lad, i can't see how the wiring would be any different??:confused:

---

Dont know to much about it myself lad i dont think its the wiring :confused:

Jay is fitting it for me, he said it is too small to fit in

im sure he could explain it a little better than me..

If its just the metal piece that runs along the side of the pump you can just use a cable tie to hold it on, they're simple to fit anyways surprisingly:o

There's a guide here, but it might be slighty different with s13's

http://www.jull.co.uk/index.php/s14-...it-walbro.html

Quote:

---

Originally Posted by CillianS14a

If its just the metal piece that runs along the side of the pump you can just use a cable tie to hold it on, they're simple to fit anyways surprisingly:o

There's a guide here, but it might be slighty different with s13's

http://www.jull.co.uk/index.php/s14-...it-walbro.html

---

I hope thatS all thats needed but i douth it somehow : (

Thats a handy guide that!!

Try DaveyMurrayMotorsport 00447740305324
He sorted me out with a pump for my r33. 80 pound sterling delivered for a dynamics 255lph one. Theyre up north.

Quote:

---

Originally Posted by SUPER 180

Dont know to much about it myself lad i dont think its the wiring :confused:

Jay is fitting it for me, he said it is too small to fit in

im sure he could explain it a little better than me..

---

after market pumps are far smaller den the standard ones you just cabletie it to the standard holder!!! anyone thats fitted one b4 will no!!

i have a gtr pump there that was in my 180

Quote:

---

Originally Posted by danmoorhead

after market pumps are far smaller den the standard ones you just cabletie it to the standard holder!!! anyone thats fitted one b4 will no!!

---

It was another lad that was doing it at the time and he said it didnt sit into where the original one did, aswell as being smaller.. i know peop cable tie them alrite!

I'll have a look at it tonight Paul!

Some times the petrol melts the cable tie which losses them after a while best job off all is a bit of wire rope and make a kinda harness for it

A jubily clip worked best for me. I think its the handiest way.

Quote:

---

Originally Posted by Jay

It was another lad that was doing it at the time and he said it didnt sit into where the original one did, aswell as being smaller.. i know peop cable tie them alrite!

I'll have a look at it tonight Paul!

---

Sound man! thanks