2010 Drift Build Questions

Just a few quick questions

I was looking at the Regs on the PD website, and i want to clear a few things up if anyone can help;

It says you need a min of a 7 point or better roll cage. I understand where a 6 point connects to the body, but what is the 7th point? I currently have a half cage and if the pipe thickness meets the requirements i want to just add to the existing cage.

Do you need a fixed rear diagonal or will a bolt in one do?

Is there just the two competitions; Amateur/Pro?

Where do people generally put the Cut off switches on the cars (i've an R32)

And finally, do cars have to have bonnet pins or am i reading that wrong?


On a differant note, does anyone know if anyone else plans on running any drift events other than PD in ireland next year? I've been out of drifting for a long time and am basically starting from scratch again, so am nervous about going out against some of the best drifters in the country (i'm sure you will all agree that even the amateur class in PD is fairly shit hot)

Anyway i think thats all i need :) Any help appreciated

Cheers

Larry

cut off swtiches usually go on the right hand side below the windscreen! dno what PD specs are thats FIA spec anyway i think

Quote:

---

Originally Posted by Larryk

It says you need a min of a 7 point or better roll cage. I understand where a 6 point connects to the body, but what is the 7th point?

Do you need a fixed rear diagonal or will a bolt in one do?

---

7th is the diagonal rear, joining the bottom most rear part of the cage to the top, i presume it has to be fixed..

Quote:

---

Originally Posted by Larryk

Is there just the two competitions; Amateur/Pro?

---

3 classes - Amateurs, Non-Seeded Pro and Pro.. (Non-Seeded is the Semi-Pro equivalent of previous years)

Quote:

---

Originally Posted by Larryk

Where do people generally put the Cut off switches on the cars (i've an R32)

---

The pull side for the marshals is generally on the bulkhead on the passenger side, or fixed to the corner of the bonnet.. The cut-off for the driver
inside is within the reach of the driver while strapped in, anywhere in the cockpit..

Quote:

---

Originally Posted by Larryk

And finally, do cars have to have bonnet pins or am i reading that wrong?

---

Yes, standard bonnet and boot latches need to be removed and pins installed so marshals can open either, incase of emergency!

Quote:

---

Originally Posted by Larryk

On a differant note, does anyone know if anyone else plans on running any drift events other than PD in ireland next year?

---

UDC, the Ulster Drift Championship run events up north.. As of yet Prodrift and UDC are the only current run drift events in Ireland, apart from practise days!

Ah, that makes sense with the rollcage question anyway. That was bugging me :)

Thanks for the info guys, appreciated

lad if i were you i'd do a few drift practice days before you get out in the car....
there's a few places..
stones,portlaoise,tullow and if you really want fun.. well whats better to drift mondello...

Quote:

---

Originally Posted by bart

lad if i were you i'd do a few drift practice days before you get out in the car....
there's a few places..
stones,portlaoise,tullow and if you really want fun.. well whats better to drift mondello...

---

Oh jesus thats the first thing i'll be doing. I'm actually doing an autotest in Wexford on October the 10th - not drifting i know but a good way to get back into the whole scene again.

I'll do a few days in Tullow, then Stones and then hit mondello early next year if all goes to plan.

Can't beat experiance :P

yea exactly... well portlaoise is there aswell..
its prob best out of that bunch(except mondello)
more than welcome to come down when its on..
cheers
bart

all seat time larry, bart has a great setup in portloise,
stonies good spot too, like just get as much seat time as you can

plus can you do a project thread larry :o:o:o
just iam consiering headn down this route as well :):)

Quote:

---

Originally Posted by S14a johno

all seat time larry, bart has a great setup in portloise,
stonies good spot too, like just get as much seat time as you can

plus can you do a project thread larry :o:o:o
just iam consiering headn down this route as well :):)

---

Yep, i have a full project thread coming very soon, we're doing a blog for our own site first, so i want to get that set up first and then i'll throw the whole lot in here too. I have fully logged every step so far with pics :)

Quote:

---

Originally Posted by Larryk

Yep, i have a full project thread coming very soon, we're doing a blog for our own site first, so i want to get that set up first and then i'll throw the whole lot in here too. I have fully logged every step so far with pics :)

---

thanks larry just i wanta know what involed before i commet to it :):)

Don't get too excited about my build though Johno, mine is a complete 'Recession Buster' build. Its being done on a very tight budget but even with this, i'm hoping that the car will be semi-competitive at least. Time will tell :)

Pics of the said build Lar or the obvious GTFO will be ensued

Quote:

---

Originally Posted by Mick K

Pics of the said build Lar or the obvious GTFO will be ensued

---

Haha, will be here next week with pics Mick, and hopefully her first event pics with it if i get her done in time for the autotest on Sunday. Fingers crossed :cool:

:(:( Car still on the lift, can't get gear oil into her at the moment, and tyres never arrived for her :( looks like the autotest this weekend is out.

Bring on the next drift day - she'll be ready next week

Quote:

---

Originally Posted by Larryk

:(:( Car still on the lift, can't get gear oil into her at the moment, and tyres never arrived for her :( looks like the autotest this weekend is out.

Bring on the next drift day - she'll be ready next week

---

Why cant ya get gear oil in :confused:

Quote:

---

Originally Posted by Stevo

Why cant ya get gear oil in :confused:

---

x2 :confused::confused:

i know it cunt on the silvia

The plug for filling the gear box is a square 'Outy' or male plug rather than the normal 'Inny' or female plug that i have always found on past nissans. Tried a few bits and bobs on the plug to open it but no joy at all. Eventually took the gear stick out and filled it from there and she's running sweet now :)

I'll open a project thread and keep you all updated over there ;)