My 200SX Build!

Hey all i got this 200sx s13 92" from Sweden that was 100% original from the beginning thats quite hard to come bye=).This is my car from start to finish "type" well enjoy.

Info:
DOHC 16V 1.8L CA18DET Single Turbo
Displacement 1809cc
Max Power (169 hp) 6400 rpm
Max Torque 225 Nm 5200 rpm
5 Speed MT
2,5 Cat-back
Heatisolated Downpipe
Grinded crankshaft Bigger bearings
TRUST / GREDDY Type RZ blow off valve
HKS Super Mega Flow "reloaded"
HKS 3" Frontpipe/Decatt
Thermostatic Oilcooler "28Row "Teflonhoses"
Sachs / Aftermarket Clutch
Bigger AFM
Skyline Spreaders 440cc
Tuned ECU Stage II

Chassi:
MacPherson Front Strut
Solid Axle
Limited Slip Differential
Cusco-Sport ZERO-3 Coilovers "Pillowball Upper Mount"

Tires, Rims and Brakes:
215/45/17 Superspeed Rims
Duro Performa HR1 Tires

Interior:
*Elektronic*
HKS Turbotimer Type/0



*Interior*
Nismo Seat Belt Lock Cover "Leather"
Räzo Race Pedals
Nismo Metal Sticker
Nismo S-Tune 5MT Leather Shift Knob

Exterior:
Tinted Windows
Soshinoya Wakataba Leafs
Rear wiper and motor removed
Clear Projector Headlight
Bi Xenon 4200K
Xenon LED
Carbon Pillars

Car Audio:

JVC KD-G731 Pioneer CDX-M40 2* Pioneer 20Gb
Ground Zero 6.9Front speakers

Futureplans for me:
D-Max roofwing
Headlight Carbon Air Duckt
Yashio Gear Boot
Xenon 8000K
Carbon Innerdoor
Carbon Interior

Engine renovate did change bearings and grinded the crankshaft:
http://desmond.imageshack.us/Himg801...jpg&res=medium

placement of my overzized oilcooler
http://desmond.imageshack.us/Himg185...jpg&res=mediumhttp://desmond.imageshack.us/Himg717...jpg&res=medium
Mr big cooler


http://desmond.imageshack.us/Himg832...jpg&res=medium

Placement brackets for oilcooler http://desmond.imageshack.us/Himg826...jpg&res=medium

Reasembling the enginge now whit electric fan biggest i found :Phttp://desmond.imageshack.us/Himg707...jpg&res=medium

Soon its alive...http://desmond.imageshack.us/Himg90/...jpg&res=medium

Its alive!http://desmond.imageshack.us/Himg822...jpg&res=medium

Got my front/downpipe but it did not fit as i expected you se the gap? :P im now only driving whit the frontpipe and original down...
http://desmond.imageshack.us/Himg860...jpg&res=mediumhttp://desmond.imageshack.us/Himg857...jpg&res=medium

getting my Xenon kit installed 4200K whit crystal headlight going to change later to 8000k :D
http://desmond.imageshack.us/Himg25/...jpg&res=mediumhttp://desmond.imageshack.us/Himg833...jpg&res=medium

The crystal headlights from ebay they totaly crap btw..http://desmond.imageshack.us/Himg171...jpg&res=medium

Did buy some new frims as well now the car looks alot better unstead of the ugly original crap :D
http://desmond.imageshack.us/Himg708...jpg&res=mediumhttp://desmond.imageshack.us/Himg801...jpg&res=mediumhttp://desmond.imageshack.us/Himg846...jpg&res=medium

http://desmond.imageshack.us/Himg8/s...jpg&res=mediumhttp://desmond.imageshack.us/Himg580...jpg&res=medium

Got even these bad boys now :D felt like a little child in christmashttp://desmond.imageshack.us/Himg42/...jpg&res=mediumhttp://desmond.imageshack.us/Himg263...jpg&res=medium

Mounted at last after much profanity..
http://desmond.imageshack.us/Himg823...jpg&res=mediumhttp://desmond.imageshack.us/Himg200...jpg&res=mediumhttp://desmond.imageshack.us/Himg706...jpg&res=mediumhttp://desmond.imageshack.us/Himg192...jpg&res=medium

http://desmond.imageshack.us/Himg585...jpg&res=medium

Got the coils mounted now need to make it higher like 3cm back 2cm front so i can drive almost anywhere :D

http://www1.garaget.org/archive/48/4...09-2420279.jpghttp://www1.garaget.org/archive/48/4...09-2420285.jpg

Oops almost forgot need some interior shots!

http://www1.garaget.org/archive/48/4...09-2292285.jpghttp://img101.imageshack.us/img101/3112/dscn4066y.jpghttp://img683.imageshack.us/img683/6844/dscn4107f.jpg

love how clean that is

great work man