DunneDriftin's R32 Skyline

Heres some new photos since i got the car, also along with the spec list.. more to be added ;)

Nissan Skyline R32 RB20DET

Body
· Genuine Origin Front Bumper
· Uras Skirts & Rear Bumper
· Aero Catch Bonnet Pins
· Advan AVS model 5 Alloys 17x9


Interior
· 2 x 6 point Harness
· Battery Master / Isolator Switch & Pull cord
· Drift Works Hydraulic Handbrake
· Bride Zeta Drivers Seat With Low Rails
· OMP Deep Dish Steering Wheel
· Roco Performence 7 Point Weld-in Roll Cage, With door bars
· HKS Manuel Water Temperature Gauge
· HKS Manuel Oil Temperature Gauge
· TIM Boost Gauge
· HKS EVC IV Boost Controller

Steering & Suspension
· Cusco Fully Adjustable Coilovers
· Japspeed Front Strut Brace
· Drift Works Hicas Removable Bar
· Engine Dampener Kit
· Carbonetic Front Pads
· Braided Brake Hoses
· Solid Rear Subframe Bushes
· Driftworks rear camber arms
· Driftworks front camber arms
· Driftworks front tension rods
· Ultralight 25mm spacers
· Uras Extra Lock Tie Rods & Ends
· Silvia S14 lower control arms
· Silvia S13 steering rack & custom pipe lines
· Drilled & Groved Front Brake Disc's



Engine
· DriftWorks Wasted Spark Kit
· Drift Works Oil Catch Can
·Walbro uprated fuel pump
· Denso BKR7EXI Spark Plugs
· Exedy 3 PUC Paddle Clutch
· Welded Diff – 4.1
· Welded Diff – 4.3
· Skyline R33 RB25 power steering pump
· RB25DET Spec 2 Turbo & HKS Adjustiable Actuator
· Samco Silicone Hoses & uprated ''T'' Wurth clamps
· Autobahn 88 Front Mount Intercooler
· Apexi Front Down Pipe
· De-cat Pipe
· Apexi Induction Kit
· RSR Cat-Back Exhaust System
· 50mm Aluminium Radiator
· 2 x 12inch RevoTec Racing Radiator Fans
· Oil Cooler & Oil filter relocation kit

http://i514.photobucket.com/albums/t...neRearLCDD.jpg



http://i514.photobucket.com/albums/t...earPassoDD.jpg

http://i514.photobucket.com/albums/t...ontPassoDD.jpg

http://i514.photobucket.com/albums/t...iverRearDD.jpg



http://i514.photobucket.com/albums/t...ylineTopDD.jpg

looks clean man, now you just have to bring it drifting and wreck it:D:D:D

:eek::eek:my sticker is gone!:eek::D:D

She looks well. have you had it out yet?

Quote:

---

Originally Posted by s13-ste

looks clean man, now you just have to bring it drifting and wreck it:D:D:D

---

Thanks Ste..

theres a few things have to be done before she gos out...

& some will all will be revelled soon ;)

Quote:

---

Originally Posted by nissan_doctor

:eek::eek:my sticker is gone!:eek::D:D

She looks well. have you had it out yet?

---

all stickers are gone:p

Thanks, not yet... been workin on her when i had time and now iv loads of it so should get it all done in a few weeks!

Roll Cage Arriving 23rd Oct.

Thats a sweet looking buss ye goin to do enythin else power wise to it

Quote:

---

Originally Posted by JDM

Thats a sweet looking buss ye goin to do enythin else power wise to it

---

Theres alot of stuff before the power unfortuanally, but it is in the pipe line... but for the time being its standard ECU 237BHP at the wheels, and going to turn the boost up to .8 bar..

Quote:

---

Originally Posted by Dunnedriftin

its standard ECU 237BHP at the wheels, and going to turn the boost up to .8 bar..

---

She's way too straight for a drift car ,need to put a few scuffs on those bumpers.
What turbo + what boost is it running to get 237 @ the wheels ?

Quote:

---

Originally Posted by Cooldrft

She's way too straight for a drift car ,need to put a few scuffs on those bumpers.
What turbo + what boost is it running to get 237 @ the wheels ?

---

should see the front splitter :p needs some fibreglass when seen upclose..

standard tubby, not sure what boost it was running.. Davie (previous owner) will be able to confirm that, i personaly didnt dyno it but im going by what i was told by previous owner.

Its 237 at the fly not the wheels:) It's running .7 bar from memory.